[Healeys] Dwell setting for a six cyl

[Bob Spidell]

Bob,

Shop manual says 35deg +/- 3deg. (all AH 6-cyls).

Pretty typical for a 6.


bs


HealeyBJ7 at aol.com wrote:
> Can anyone tell me the correct dwell setting for a six cylinder healey  
> engine? 
> Its a BJ7 if it matters. I think a dwell setting is more accurate than a  
> point gap, but I can't seem to find a spec.
> TIA
> Bob
>
>
>
> ************************************** Get a sneak peek of the all-new AOL at 
> http://discover.aol.com/memed/aolcom30tour
> _______________________________________________
> bspidell at comcast.net 
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
>   

-- 
***************************************************************
Bob Spidell         San Jose, CA        bspidell at comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************