[Healeys] speedo cable broke

[Richard Bittmann]

Remember, the speedo cable turns counterclockwise!  Richard Bittmann BJ7 
Tacoma

----- Original Message ----- 
From: "Alan Seigrist" <healey.nut at gmail.com>
To: "fred anderson" <fandy at sbcglobal.net>; <healeys at autox.team.net>
Sent: Sunday, July 29, 2007 4:16 PM
Subject: Re: [Healeys] speedo cable broke


> Fred -
>
> Yep,  there's a first time for everything!  It should turn easily by
> hand.  I would double check by putting a screwdriver in the drive and
> checking again if it turns.
>
> Only one choice worth your efforts for speedo repair.  Send it to
> Margaret Lucas in New Mexico.  505 766 6661.  Address:
>
> Mo Ma Manufacturing
> 1321 Second St. NW
> Albuquerque NM
>
> Alan
>
> On 7/30/07, fred anderson <fandy at sbcglobal.net> wrote:
>> My speedo cable an housing broke into yesterday going to a show. I took 
>> my
>> speedo out and put the square broken end into the speedo input and it 
>> would
>> not turn by hand.Do I need to send my speedo of for repair? I have had
>> healeys
>> for 30 years and this has never happened before Fred.
>> BJ8
>> BJ7
>> _______________________________________________
>> healey.nut at gmail.com
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>
>
> -- 
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
> _______________________________________________
> edmyed at harbornet.com
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys