[Healeys] Front wheel bearings

[Alan Seigrist]

My BN1 with early lateral load ball type bearings has the spacer....

- Original message -
Infact if one studies the workshop manuals closely.

On 7/25/07, Magnus Karlsson <magnuskarlsson at bornet.net> wrote:
> Infact if one studies the workshop manuals closely it4s evident that
> the early BN 24s with the same stub axle as the later cars were
> fitted without the spacer and no shims. I have also found this to be
> true on early BN 2 cars. These cars run perfectly well without the
> spacer, -no proplems.
>
> Magnus Karlsson
> _______________________________________________
> healey.nut at gmail.com
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>


-- 
Alan

'52 A90
'53 BN1
'64 BJ8