[Healeys] Dash bracket shims?

[Alan Seigrist]

Bill -

That does seem like too much space to me.  Are the brackets properly mounted
on the back of your dash?  the edge of the bracket should be more or less
flush with the bottom corner of each side of the dash.   I can send you
pictures of mine?  There aren't any washers or spacers... it just fits
right.

Alan


On 8/19/07, wericars at aol.com <wericars at aol.com> wrote:
>
> Hello list.? It is a great day for working on a Healey restoration!? As I
> install my dash, I notice there is quite a bit of space between the end
> brackets and the chassis where the bolt secures the dash to the door frame.?
> I'd say about a quarter to a half inch on either side.? Is there a shim or
> spacer that is supposed to go between the bracket and the chassis?? I see
> nothing in the Parts Books or the Moss catalogue.
>
>
> Bill
> Boston area
> 65 BJ8
>
> ________________________________________________________________________
> AOL now offers free email to everyone.  Find out more about what's free
> from AOL at AOL.com.
> _______________________________________________
> healey.nut at gmail.com
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>



-- 
Alan

'52 A90
'53 BN1
'64 BJ8