[Healeys] water tap handle

[andy pole]

Carroll
As you can see by the pictures mine had also been broken off by the PO. 
There was a hole but it didnt appear that the handle had been brazed or had 
a thread, I managed to find a piece of 6mm approx? brass rod at work and 
used a die for the thread and tapped out the existing hole, then rounded the 
end on a grinding wheel, took about 10 minutes (and looks ok). I quess the 
brass rod could be begged as this little amount is nothing (if you cannot 
get any, send me your address and I will get you some, might take a few days 
to come from the uk) I also replaced the spring with a bit of stainless 
spring.
It beats paying the silly money for a new one.
Andy

_________________________________________________________________
Get Pimped! FREE emoticon packs from Windows Live -  
http://www.pimpmylive.co.uk

[demime 1.01d removed an attachment of type image/pjpeg which had a name of heatertap.JPG]

[demime 1.01d removed an attachment of type image/pjpeg which had a name of heatertaprebuilt.JPG]