[Healeys] water tap handle

[wericars at aol.com]

You can make your own with a shouldered 10/32 screw.? I think they are 10/32, but you get the idea.? You want a long shaft screw with threads at the first quarter inch.? You just cut off the head of the screw and shape the shaft on a grinder to match the shape of the original.? If you are good with a grinder, you can even reproduce the short shoulder right at the connection with the valve body by rounding off a matching nut.


Bill
Boston area
65 BJ8


-----Original Message-----
From: Carroll A Phillips <bjcap at optonline.net>
To: healey list <healeys at autox.team.net>
Sent: Tue, 14 Aug 2007 10:17 pm
Subject: [Healeys] water tap handle



Does anyone manufacture the water tap handle for the valve on the 3000's?  I 
believe these are screw on .

Carroll Phillips 
_______________________________________________
wericars at aol.com 

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.