[Healeys] Gasket sealants

[tfsbj7 at mindspring.com]

I used to use Permatex sealants,   Their black gooey #2 gasket sealer served many automotive and plumbing applications.   However, once I was exposed to Hylomar I switched.  I think Permatex bought Hylomar and now it is part of the Permatex line.   Anyway, I use Hylomar for just about everything.  It is easy to apply, easy to clean up, and works under all the temps under the car hood except for exhaust.   On the exhaust system I use one of the copper colored sealants.  The only other sealant I use around the garage and house is the teflon impregnated stuff that I use on potable water fixtures.... other than those two exceptions, I choose Hylomar.   My local NAPA dealer has it on his shelf.

-skip-



-----Original Message-----
>From: Ron Fine <RonFineEsq at earthlink.net>
>Sent: Aug 9, 2007 3:02 AM
>To: mgs at autox.team.net, healeys at autox.team.net
>Subject: [Healeys] Gasket sealants
>
>I am putting my rebuilt transmission back together and once again I am stumped
>on what gasket sealant to use. 
>
>Any suggestions, advise or opinions would be appreciated.
>
>Thanks,
>Ron Fine
>61 BN7
>66 MGB
>_______________________________________________
>tfsbj7 at mindspring.com 
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys