<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" class="">I’m offering just the rockers, not the whole assembly with pedestals, etc. I originally got the 1.55 assembly to go with a new cam I was trying out. These have literally been run about 10 dyno pulls - I did not like the results at all and swapped the cam out for one that requires 1.65 rockers. Richard sold me replacement rockers that I swapped into the assembly, so now I have 12 hardly used rockers.<div class="">Use for spares, buy the other assembly parts from Richard to put together a complete set, or put them together with stock pedestals. Your choice.</div><div class=""><br class=""></div><div class="">Rockers are $58.50 each from Richard, $702 total. An entire assembly is $999, I’m not sure what the other parts cost. Make me an offer. My loss is your gain. I’m not interested in selling individual rockers for spares unless you put together a consortium to take them all!</div><div class=""><br class=""></div><div class="">Also, looking for a good 3.89 ring and pinion or entire diff, condition of everything but the gears unimportant.</div><div class=""><br class=""></div><div class="">I’ll be at PittRace this weekend if that helps make any of this happen.</div><div class=""><br class=""></div><div class="">Scott Janzen</div><div class=""><br class=""></div></body></html>