<div>
<div class="userEdit" style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;"><span style="color: #000000; font-style: normal; font-weight: 400;">There is no solder in the fin to tube transfer.....the tubes are a Brazed alum. that is 7 to 12 percent outer layer of Silicon...depending on whether it is for one side or 2....these ingots are mated together (1 or 2 side ) with the original 3000 series base ingot ...So you have a base ingot (about 20") and one or 2 outer ingots(about 2' to 3' per side as spec req.required) stacked up to get your one or 2 side outer layers... Then they are hot rolled on a reversing mill to several passes to get thin er gauges...which next goes to some 4 stnd cold rolling mills. to get down to about .80 ...this is now ready to ship to finishig mill....which then will take about 8 passes to get down to about .006 to .004"....during this process ,you may need to inter-anneal at certain passes,to end up with H-19 to H -0 TEMPERS for forming ,etc. dependent on customers finish processes, and customer requierments (many)....This is non technical info as req. by secrecy agreements....BTW...Fin stock is run seperate ly ,and produced to .003" ish to . 0045" ish,plus specials for other reqs........rick<br></span></div>
<div class="userEdit" style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;"> </div>
<div class="userEdit" style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;"> </div>
<div class="userEdit" style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;"> </div>
<div class="userEdit" style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;"> </div>
<br>In a message dated 1/4/2022 5:24:23 PM Eastern Standard Time, fot@autox.team.net writes:
<div> </div>
<div class="quotedReply">
<blockquote style="padding-left: 5px; margin-left: 5px; border-left: blue 2px solid;">
<div id="yiv1040277252">
<div>
<div dir="ltr"> </div>
<div dir="ltr">This is informative….</div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr">
<div dir="ltr"><strong>What material makes the better Radiator: Aluminum or Copper?</strong></div>
<div dir="ltr"><br clear="none"><a href="https://www.motormouthradio.com/blog/118-what-material-makes-the-better-radiator-aluminum-or-copper" target="_blank" rel="noopener noreferrer">https://www.motormouthradio.com/blog/118-what-material-makes-the-better-radiator-aluminum-or-copper</a></div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
</div>
<div dir="ltr">
<div dir="ltr"><strong>An Aluminum or Copper Radiator for Your Car - Car Craft Magazine</strong></div>
<div dir="ltr"><br clear="none"><a href="https://www.motortrend.com/how-to/ccrp-0211-aluminum-or-copper-radiator-for-your-car/" target="_blank" rel="noopener noreferrer">https://www.motortrend.com/how-to/ccrp-0211-aluminum-or-copper-radiator-for-your-car/</a></div>
</div>
<div dir="ltr">
<div id="yiv1040277252yqtfd73893" class="yiv1040277252yqt0241680626"><br clear="none">
<blockquote>On Jan 4, 2022, at 12:56 PM, TeriAnn J. Wakeman via Fot <fot@autox.team.net> wrote:<br clear="none"><br clear="none"></blockquote>
</div>
</div>
<blockquote>
<div dir="ltr">
<div id="yiv1040277252yqtfd57369" class="yiv1040277252yqt0241680626">On 1/4/22 11:50 AM, dustin nicholson via Fot wrote:<br clear="none">
<blockquote>I read an interesting article once that said while brass/copper out performs aluminum, an aluminum radiator will dissipate heat better than brass radiators because of all the leads solder in the seams of the brass. Lead holds the heat and therefore offsets the advantage of the brass. Seems like reasonable logic but I can’t substantiate it.</blockquote>
<br clear="none"><br clear="none">Why aluminum radiators are better than bass:<br clear="none"><br clear="none">Thermal conductivity Btu/(hr.ft degrees F)<br clear="none"><br clear="none">brass (stock radiators) - 83 degrees<br clear="none">Aluminum (radiators) - 126<br clear="none">copper - 218<br clear="none"><br clear="none">cast iron - 27.7<br clear="none"><br clear="none">TeriAnn<br clear="none"><br clear="none">_______________________________________________<br clear="none"><a href="mailto:fot@autox.team.net" target="_blank" rel="noopener noreferrer">fot@autox.team.net</a><br clear="none"><br clear="none"><a href="http://www.fot-racing.com" target="_blank" rel="noopener noreferrer">http://www.fot-racing.com</a><br clear="none"><br clear="none">Donate: <a href="http://www.team.net/donate.html" target="_blank" rel="noopener noreferrer">http://www.team.net/donate.html</a><br clear="none">Archive: <a href="http://autox.team.net/archive" target="_blank" rel="noopener noreferrer">http://autox.team.net/archive</a> <a href="http://www.team.net/pipermail/fot" target="_blank" rel="noopener noreferrer">http://www.team.net/pipermail/fot</a></div>
<br clear="none">Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/4msonset@gmail.com" target="_blank" rel="noopener noreferrer">http://autox.team.net/mailman/options/fot/4msonset@gmail.com</a>
<div id="yiv1040277252yqtfd02451" class="yiv1040277252yqt0241680626"><br clear="none"><br clear="none"><br clear="none"></div>
</div>
</blockquote>
</div>
</div>
<div id="yqtfd32995" class="yqt0241680626">_______________________________________________<br clear="none"><a href="mailto:fot@autox.team.net" shape="rect">fot@autox.team.net</a><br clear="none"><br clear="none"><a href="http://www.fot-racing.com" target="_blank" rel="noopener" shape="rect">http://www.fot-racing.com</a><br clear="none"><br clear="none">Donate: <a href="http://www.team.net/donate.html" target="_blank" rel="noopener" shape="rect">http://www.team.net/donate.html</a><br clear="none">Archive: <a href="http://autox.team.net/archive" target="_blank" rel="noopener" shape="rect">http://autox.team.net/archive </a><a href="http://www.team.net/pipermail/fot" target="_blank" rel="noopener" shape="rect">http://www.team.net/pipermail/fot</a><br clear="none">Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/rek46@aol.com" target="_blank" rel="noopener" shape="rect">http://autox.team.net/mailman/options/fot/rek46@aol.com</a><br clear="none"><br clear="none"><br clear="none"></div>
</blockquote>
</div>
</div>