<html><body><div style="font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 10pt; color: #000000"><div><br></div><div>It seems that about all sealants are performing well on the Fo8 gaskets, maybe because there is no need for it? So, most products won't do any harm, but be aware of anaerobic gasket makers : these can cure very fast, forming an elastic layer of some thou thickness : the Fo8 gaskets won't leak, but the cylinderhead gasket will.</div><div>Marcel</div><hr id="zwchr" data-marker="__DIVIDER__"><div data-marker="__HEADERS__"><b>Van: </b>"fot" <fot@autox.team.net><br><b>Cc: </b>"Triumph List" <triumphs@autox.team.net>, "fot" <fot@autox.team.net><br><b>Verzonden: </b>Zondag 7 februari 2021 03:17:01<br><b>Onderwerp: </b>Re: [Fot] [TR] Sealants used on Fo8 gaskets<br></div><div><br></div><div data-marker="__QUOTED_TEXT__"><div dir="ltr"></div><div dir="ltr">Don’t know if it’s my trick or if everyone does it but... </div><div dir="ltr">Once I’ve got the liner landing as clean as I can get it, I use a old liner as a hone and by twisting is back and forth with some valve lapping compound, get a nice shiny ring on the block mating face. Clean it up good and then use your sealant of choice.</div><div dir="ltr">Greg “Lunker” Hilyer</div><div dir="ltr">Albuquerque NM</div><div dir="ltr"><br>On Feb 6, 2021, at 6:30 PM, Frank Fisher via Fot <<a href="mailto:fot@autox.team.net" target="_blank" rel="nofollow noopener noreferrer">fot@autox.team.net</a>> wrote:<br><br></div><blockquote><div dir="ltr"><div class="ydpa6a2aedcyahoo-style-wrap" style="font-family:'helvetica neue' , 'helvetica' , 'arial' , sans-serif;font-size:16px">
<div dir="ltr">hylomar.</div><div dir="ltr"><br></div><div dir="ltr">never sets up solid like silicone.</div><div dir="ltr">that means you have time to set the liners and go have a scotch, come back, mess around. </div><div dir="ltr">leave it overnight and take up the task again tomorrow.</div><div dir="ltr"><br></div><div dir="ltr">the best gasket dressing ever invented.</div><div dir="ltr"><br></div><div dir="ltr">Frank</div><br>
</div><div id="ydp2984ea6cyahoo_quoted_3384257547" class="ydp2984ea6cyahoo_quoted">
<div style="font-family:'helvetica neue' , 'helvetica' , 'arial' , sans-serif;font-size:13px;color:#26282a">
<div>
On Friday, February 5, 2021, 09:52:33 PM PST, Dan Cronin <<a href="mailto:adcronin@mi.rr.com" target="_blank" rel="nofollow noopener noreferrer">adcronin@mi.rr.com</a>> wrote:
</div>
<br>
<br>
<div><div id="ydp2984ea6cyiv8272376385"><div>Folks<div class="ydp2984ea6cyiv8272376385">Looking for some background information and recommendations on the preferred Fo8 gasket sealing compound that seems to have worked for each of you in your various engine re-builds. And any comments / observations you choose to share either on or off list. The motor I am building has a 89 mm piston and liner kit from BFE along with Corrello rods / bolts and a Crower dummy main crank connected at the front with a ATI Super Damper and at the rear to a Fidanza Alloy Flywheel with diaphragm clutch, an HVDA conversion with alloy drive shaft to a Quaife 4.11:1 diff. and alloy back cover. Stainless Steel valves with 0.050 oversize intake thru Mang. Bronze guides. H/S roller rockers on alloy pedestals. BPNW 270 duration cam. The TR4A head has had 0.040 removed mostly to true things up and remove prior imperfections. The head chambers have been mildly worked to smooth any sharp edges and even things out with a resulting chamber volume of 60.5cc each. I am planning on installing Gasket Works 0.022 copper gasket with their 0.005 “O” compression rings on the head side of the gasket that will be sprayed with a copper coating on each side. Gasket Works sent a set of Fo8 individual gaskets that has allowed me to obtain a liner protrusion of 0.0025 to 0.003. Am aiming at a compression ratio of around 9.75 to 1+/- . Looking forward to as many responses as possible to assist in trying to get this critical step as close to right as I can.</div><div class="ydp2984ea6cyiv8272376385">DC</div><div class="ydp2984ea6cyiv8272376385"><IMG_3668.jpeg></div></div></div>** <a href="mailto:triumphs@autox.team.net" rel="nofollow nofollow noopener noreferrer" target="_blank">triumphs@autox.team.net</a> **<br><br>Donate: <a href="http://www.team.net/donate.html" rel="nofollow nofollow noopener noreferrer" target="_blank">http://www.team.net/donate.html</a><br>Archive: <a href="http://www.team.net/pipermail/triumphs" rel="nofollow nofollow noopener noreferrer" target="_blank">http://www.team.net/pipermail/triumphs </a> <a href="http://www.team.net/archive" rel="nofollow nofollow noopener noreferrer" target="_blank">http://www.team.net/archive</a><br><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com" rel="nofollow nofollow noopener noreferrer" target="_blank">http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com</a><br></div>
</div>
</div></div></blockquote><blockquote><div dir="ltr"><IMG_3668.jpeg></div></blockquote><blockquote><div dir="ltr">_______________________________________________<br><a href="mailto:fot@autox.team.net" target="_blank" rel="nofollow noopener noreferrer">fot@autox.team.net</a><br><br><a href="http://www.fot-racing.com" target="_blank" rel="nofollow noopener noreferrer">http://www.fot-racing.com</a><br><br>Donate: <a href="http://www.team.net/donate.html" target="_blank" rel="nofollow noopener noreferrer">http://www.team.net/donate.html</a><br>Archive: <a href="http://autox.team.net/archive" target="_blank" rel="nofollow noopener noreferrer">http://autox.team.net/archive</a> <a href="http://www.team.net/pipermail/fot" target="_blank" rel="nofollow noopener noreferrer">http://www.team.net/pipermail/fot</a><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/lunkercars@yahoo.com" target="_blank" rel="nofollow noopener noreferrer">http://autox.team.net/mailman/options/fot/lunkercars@yahoo.com</a><br><br><br></div></blockquote><br>_______________________________________________<br>fot@autox.team.net<br><br>http://www.fot-racing.com<br><br>Donate: http://www.team.net/donate.html<br>Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot<br>Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be<br></div></div></body></html>