<div dir="ltr"><div>Happy New Year</div><div>Quick Question</div><div>I have rebuilt numerous A-types over the last few years, but I have one that's been giving us fits.</div><div>Transmission was a TR6 and the mainshaft was replaced with the proper overdrive shaft for the A-type.</div><div>The A-type appears to be an early one with steel piston rings on the apply pistons. </div><div>The pump was replaced and puts out +300 psi during testing.</div><div>The overdrive and trans was tested by back spinning from the tailshaft flange with an electric motor.</div><div>The overdrive appears to be engaged and it appears that the pressure will not drop.</div><div>The pressure relief at the pump was removed and the accumulator was loosened to relieve the pressure.</div><div>Now trans in neutral the output shaft of the overdrive appears to be locked up and will not spin.</div><div>Any ideas??</div><div>Thanks in advance</div><div>Glenn</div><div><br></div></div>