<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>I've always heard that if you have a balance tube between front
and rear carb that you want to run in 1 and 4 so you can better
isolate which carb you want to adjust.</p>
<p>I have mine in 1 and 4 but run webers so no balance tube. I see
up to 1450 F at the end of long straights. Much more than that
and I start to transfer aluminum from the piston to the cylinder
walls. I think there's some variation in temp readings between
different probes and gauges, I don't know what the accuracy really
is.</p>
<p>It's a great troubleshooting tool when the car starts to run like
crap. Another helpful tools is a fuel pressure gauge (with
isolator so you don't pipe gas into the passenger compartment).
Pressure too high overruns the floats. To low and you've got
something funny with the feed like a regulator / pump going bad or
you forgot to put gas in the car.<br>
</p>
<p>- Tony<br>
</p>
<div class="moz-cite-prefix">On 2/27/2019 6:10 PM, Barr, Scott via
Fot wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CY4PR15MB187915C40ECD651FC213C2B4E1750@CY4PR15MB1879.namprd15.prod.outlook.com">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<meta name="Generator" content="Microsoft Word 15 (filtered
medium)">
<!--[if !mso]><style>v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style><![endif]-->
<style><!--
/* Font Definitions */
@font-face
{font-family:Helvetica;
panose-1:2 11 6 4 2 2 2 2 2 4;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"Century Gothic";
panose-1:2 11 5 2 2 2 2 2 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.msonormal0, li.msonormal0, div.msonormal0
{mso-style-name:msonormal;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
p.yiv1325082919msonormal, li.yiv1325082919msonormal, div.yiv1325082919msonormal
{mso-style-name:yiv1325082919msonormal;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
span.yiv1325082919msohyperlink
{mso-style-name:yiv1325082919msohyperlink;}
span.yiv1325082919msohyperlinkfollowed
{mso-style-name:yiv1325082919msohyperlinkfollowed;}
p.yiv1325082919msonormal1, li.yiv1325082919msonormal1, div.yiv1325082919msonormal1
{mso-style-name:yiv1325082919msonormal1;
margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Arial",sans-serif;}
span.yiv1325082919msohyperlink1
{mso-style-name:yiv1325082919msohyperlink1;
color:blue;
text-decoration:underline;}
span.yiv1325082919msohyperlinkfollowed1
{mso-style-name:yiv1325082919msohyperlinkfollowed1;
color:#954F72;
text-decoration:underline;}
span.EmailStyle24
{mso-style-type:personal-reply;
font-family:"Century Gothic",sans-serif;
color:#1F497D;
font-weight:normal;
font-style:normal;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Century
Gothic",sans-serif;color:#1F497D">Interesting – why not
1 and 4 or 2 and 3?<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Century
Gothic",sans-serif;color:#1F497D"><o:p> </o:p></span></p>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Century
Gothic",sans-serif;color:#1F497D">Scott (B.)<o:p></o:p></span></p>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Century
Gothic",sans-serif;color:#1F497D"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span
style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span
style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Fot
<a class="moz-txt-link-rfc2396E" href="mailto:fot-bounces@autox.team.net"><fot-bounces@autox.team.net></a>
<b>On Behalf Of </b>Rick Parent via Fot<br>
<b>Sent:</b> Wednesday, February 27, 2019 2:20 PM<br>
<b>To:</b> John Styduhar <a class="moz-txt-link-rfc2396E" href="mailto:johnstydo@gmail.com"><johnstydo@gmail.com></a>;
Terry Stetler <a class="moz-txt-link-rfc2396E" href="mailto:tlizzard@msn.com"><tlizzard@msn.com></a><br>
<b>Cc:</b> Friends of Triumph <a class="moz-txt-link-rfc2396E" href="mailto:fot@autox.team.net"><fot@autox.team.net></a><br>
<b>Subject:</b> Re: [Fot] EGT gauge installation<o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif"><o:p> </o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif">If
you are using SU's I would use Cylinders 1 and 3 or 2
and 4. If you are using dual Webers I prefer the same as
above but any two will do really.<o:p></o:p></span></p>
</div>
</div>
<div id="yahoo_quoted_1935976754">
<div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">On
Wednesday, February 27, 2019, 1:00:53 AM EST, Terry
Stetler via Fot <<a
href="mailto:fot@autox.team.net"
moz-do-not-send="true">fot@autox.team.net</a>>
wrote:
<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A"><o:p> </o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A"><o:p> </o:p></span></p>
</div>
<div>
<div id="yiv1325082919">
<div>
<div>
<p class="yiv1325082919msonormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">One
and Four. Typically those would run the leaner
than Two and Three.<o:p></o:p></span></p>
<p class="yiv1325082919msonormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A"> <o:p></o:p></span></p>
<p class="yiv1325082919msonormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">Terry
Stetler<o:p></o:p></span></p>
<p class="yiv1325082919msonormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A"> <o:p></o:p></span></p>
<p class="yiv1325082919msonormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">Sent
from
<a
href="https://go.microsoft.com/fwlink/?LinkId=550986"
target="_blank" moz-do-not-send="true">Mail</a>
for Windows 10<o:p></o:p></span></p>
<p class="yiv1325082919msonormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A"> <o:p></o:p></span></p>
</div>
<div class="MsoNormal" style="text-align:center"
align="center"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">
<hr width="98%" size="3" align="center">
</span></div>
<div id="yiv1325082919yqt93845">
<div id="yiv1325082919divRplyFwdMsg">
<p class="MsoNormal"><b><span
style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:black">From:</span></b><span
style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:black">
Fot <<a
href="mailto:fot-bounces@autox.team.net"
moz-do-not-send="true">fot-bounces@autox.team.net</a>>
on behalf of John Styduhar via Fot <<a
href="mailto:fot@autox.team.net"
moz-do-not-send="true">fot@autox.team.net</a>><br>
<b>Sent:</b> Tuesday, February 26, 2019
12:30:15 PM<br>
<b>To:</b> Triumph 'Friends of Triumph<br>
<b>Subject:</b> [Fot] EGT gauge installation</span><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">
<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A"> <o:p></o:p></span></p>
</div>
</div>
<div>
<div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A">I
need some tips on installation of a dual
probe EGT gauge on the TR4 race engine
with twin Strombergs-<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A">What
two cylinder to use for probes.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A">Optimum
EG temperature for tuning purposes.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A"><o:p> </o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A"><o:p> </o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A">Thanks <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Helvetica",sans-serif;color:#26282A"><o:p> </o:p></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
<div id="yqt48032">
<p class="MsoNormal" style="margin-bottom:12.0pt"><span
style="font-size:10.0pt;font-family:"Helvetica",sans-serif;color:#26282A">_______________________________________________<br>
<a href="mailto:fot@autox.team.net"
moz-do-not-send="true">fot@autox.team.net</a><br>
<br>
<a href="http://www.fot-racing.com" target="_blank"
moz-do-not-send="true">http://www.fot-racing.com</a><br>
<br>
Donate: <a href="http://www.team.net/donate.html"
target="_blank" moz-do-not-send="true">http://www.team.net/donate.html</a><br>
Archive: <a
href="http://www.team.net/pipermail/fot"
target="_blank" moz-do-not-send="true">http://www.team.net/pipermail/fot</a><br>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/fot/rick.parent@att.net"
target="_blank" moz-do-not-send="true">
http://autox.team.net/mailman/options/fot/rick.parent@att.net</a><br>
<br>
<o:p></o:p></span></p>
</div>
</div>
</div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
<a class="moz-txt-link-abbreviated" href="mailto:fot@autox.team.net">fot@autox.team.net</a>
<a class="moz-txt-link-freetext" href="http://www.fot-racing.com">http://www.fot-racing.com</a>
Donate: <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/fot">http://www.team.net/pipermail/fot</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/fot/tony@tonydrews.com">http://autox.team.net/mailman/options/fot/tony@tonydrews.com</a>
</pre>
</blockquote>
</body>
</html>