<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>All,</div><div><br></div><div>Appreciate all the feedback. As this was my first time tearing into an overdrive, I am not familiar with how they work and what is acceptable. </div><div><br></div><div>I was following the great articles on the Buckeye website. </div><div><a href="http://www.buckeyetriumphs.org/technical/AOD/AOD3/AOD3.htm">http://www.buckeyetriumphs.org/technical/AOD/AOD3/AOD3.htm</a></div><div><br></div><div>Towards the end of the reassembly section, the article discuss the air test which I thought could save me some trouble of trial and error. </div><div><br></div><div>I am happy that the clutch is operating as expected and plan to reassemble and bench test to check for operating pressure. </div><div><br></div><div>Thanks again for the advice. </div><div><br></div><div>Greg</div><div><br><br><div>Sent from my iPhone</div></div><div><br>On Mar 6, 2018, at 5:20 PM, M&M Hado via Fot <<a href="mailto:fot@autox.team.net">fot@autox.team.net</a>> wrote:<br><br></div><blockquote type="cite"><div><meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="Generator" content="Microsoft Word 14 (filtered medium)"><!--[if !mso]><style>v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style><![endif]--><style><!--
/* Font Definitions */
@font-face
{font-family:Helvetica;
panose-1:2 11 6 4 2 2 2 2 2 4;}
@font-face
{font-family:Helvetica;
panose-1:2 11 6 4 2 2 2 2 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Arial","sans-serif";
color:black;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
span.EmailStyle21
{mso-style-type:personal-reply;
font-family:"Arial","sans-serif";
color:black;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--><div class="WordSection1"><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">I agree. To me using air is not so much to test the “seals” (O-rings, balls & seats, accumulator piston rings, etc.) but to test the mechanical movement of the overdrive internals. Greg’s test showed the pistons moving the cone clutch very well with only 120 psi so that’s what I would be looking for on the air test and nothing more. Plus, this is something you can do on the bench before putting it together since oil pressure is not yet available before assembly. I think it’s inevitable that you will hear a lot of air leakage past the operating valve with this mechanical test and doesn’t prove that anything is hydraulically “tight.” The bottom line is to get the 400 psig and, if you do, any leakage past these areas is internal and a moot point.<o:p></o:p></span></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black"><o:p> </o:p></span></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">Mike<o:p></o:p></span></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black"><o:p> </o:p></span></p><div><div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> Fot [<a href="mailto:fot-bounces@autox.team.net">mailto:fot-bounces@autox.team.net</a>] <b>On Behalf Of </b>Charly Mitchel via Fot<br><b>Sent:</b> Tuesday, March 6, 2018 1:58 PM<br><b>To:</b> J Wagner<br><b>Cc:</b> <a href="mailto:fot@autox.team.net">fot@autox.team.net</a><br><b>Subject:</b> Re: [Fot] Type A OD pressure test<o:p></o:p></span></p></div></div><p class="MsoNormal"><o:p> </o:p></p><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Not to me it isn't, it's not really proving anything. Can't tell it it's leaking past seals.</span><o:p></o:p></p></div><div><p class="MsoNormal">Charly Mitchel<br>TR6 #44<o:p></o:p></p></div><div><p class="MsoNormal">----- Original Message ----- <o:p></o:p></p></div><blockquote style="border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt;margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt"><div><p class="MsoNormal" style="background:#E4E4E4"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> <a href="mailto:4msonset@gmail.com" title="4msonset@gmail.com">J Wagner</a> <o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">To:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> <a href="mailto:charly@mitchelplumbing.com" title="charly@mitchelplumbing.com">Charly Mitchel</a> <o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Cc:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> <a href="mailto:fot@autox.team.net" title="fot@autox.team.net">fot@autox.team.net</a> <o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Sent:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> Tuesday, March 06, 2018 11:40 AM<o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Subject:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> Re: [Fot] Type A OD pressure test<o:p></o:p></span></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">Makes sense. Subsequently, is compressed air a viable means of testing seals that normally run gear oil?<o:p></o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>On Mar 6, 2018, at 10:17 AM, Charly Mitchel <<a href="mailto:charly@mitchelplumbing.com">charly@mitchelplumbing.com</a>> wrote:<o:p></o:p></p></div><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">I believe the answer is the water molecules are larger than the air molecules, which makes them easier to pass through the space. I think Gore-Tex work the same way, lets the fabric breathe, but keeps the water out.</span><o:p></o:p></p></div><div><p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Not sure why I know this :)</span><o:p></o:p></p></div><div><p class="MsoNormal">Charly Mitchel<br>TR6 #44<o:p></o:p></p></div><div><p class="MsoNormal">----- Original Message ----- <o:p></o:p></p></div><blockquote style="border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt;margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt"><div><p class="MsoNormal" style="background:#E4E4E4"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> <a href="mailto:fot@autox.team.net" title="fot@autox.team.net">J Wagner via Fot</a> <o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">To:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> <a href="mailto:fot@autox.team.net" title="fot@autox.team.net">fot@autox.team.net</a> <o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Sent:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> Tuesday, March 06, 2018 8:03 AM<o:p></o:p></span></p></div><div><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Subject:</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> Re: [Fot] Type A OD pressure test<o:p></o:p></span></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">I’m almost embarrassed to chime in here as I have no expertise on the inner workings of a transmission, but perhaps it’s more of a question than an answer.<o:p></o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">I’ve run a lot of PVC irrigation pipe in my day, particularly in the last few years landscaping my house. I’ve noticed that whenever I turn on a new system, the air compressed by the incoming water with force it’s way past connections of threaded pipe, joined with teflon tape, and take a little water with it. Just when I’m thinking that I’ve failed to tighten the pipe enough, the leaking stops once all the air escapes. <o:p></o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">I suppose it’s a fluid dynamics question. Will compressed air act differently on seals than pressurized oil?<o:p></o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">Maybe the escape of air is as meaningless as it has been in my sprinklers?<o:p></o:p></p></div><div><p class="MsoNormal"><o:p> </o:p></p></div><div><p class="MsoNormal">—Justin<o:p></o:p></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>On Mar 6, 2018, at 6:48 AM, M&M Hado via Fot <<a href="mailto:fot@autox.team.net">fot@autox.team.net</a>> wrote:<o:p></o:p></p></div><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">Greg,</span><o:p></o:p></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">Just a couple more thoughts to add to the good suggestions already offered. I especially liked Jack’s idea of hand-lapping in the aluminum seats with a ball welded to a rod. </span><o:p></o:p></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">I’m guessing that most of the air you’re hearing is leaking around the outside of the operating valve since air is much more likely to do so than the relatively thick 90 weight oil. Just the fact that only 120 psi of air pressure is enough to move the operating pistons tells me that the rest of your system is relatively tight. The normal operating pressure after all is about 400 psig so you have a lot of “fat” built into it. </span><o:p></o:p></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">One thing that might cause the operating pistons to move with a relatively small pressure is having weak or incorrect springs pushing the cone clutch rearward. Be sure you have the so-called “long” and “short” ones in the right locations, It’s actually the coil bound length that determines which is which. If you put a long one where a short one will be, it may bind before reaching full movement, resulting in the cone clutch not reaching the brake ring. Don’t ask me how I know this. To check this, I put each spring on a threaded rod and run a nut down the rod until the coil binds. Measure the length at that point and the long springs will be about 3/8” longer than the short ones.</span><o:p></o:p></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">Also, the seating of the balls on the aluminum seats in the casing is indeed important but it’s also important to have a good seat between the ball and tip of the operating valve. I had a D-type OD that was eating my lunch with low operating pressure during engagement and the tip of the valve was nicked resulting in a bad seal. Changing the valve solved the problem. The oil flow is very small in the system so a leak of even the smallest area will drop the pressure quite a bit.</span><o:p></o:p></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">Lastly, you mentioned the “relief valve” and I’m not sure which valve you are referring to since the pressure relief occurs when the accumulator piston moves enough to uncover the relief holes back to the sump. Since you only had 120 psi, the accumulator piston would not have moved nearly enough to “relieve.” I’m guessing you were referring to the operating valve.</span><o:p></o:p></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:black">Mike Hado</span><o:p></o:p></p><div><div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> Fot [<a href="mailto:fot-bounces@autox.team.net">mailto:fot-bounces@autox.team.net</a>] <b>On Behalf Of </b>barry rosenberg via Fot<br><b>Sent:</b> Tuesday, March 6, 2018 5:31 AM<br><b>To:</b> Jack Wheeler; Greg Blake via Fot<br><b>Subject:</b> Re: [Fot] Type A OD pressure test</span><o:p></o:p></p></div></div><div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:black">I used to put the ball in a tap in down with a blunt punch. As the case is aluminum and the ball hard steel, it made a very nice seat for itself. This can be done without pulling the OD apart. Just pull the plug, spring and little plunger.</span><o:p></o:p></p></div><div id="yui_3_16_0_ym19_1_1520335633478_5731"><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:black">Barry</span><o:p></o:p></p></div><div><div><div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Arial","sans-serif";color:black">On Monday, March 5, 2018 5:26 PM, Jack Wheeler via Fot <<a href="mailto:fot@autox.team.net">fot@autox.team.net</a>> wrote:</span><o:p></o:p></p></div><div><div id="yiv8470877085"><div><div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:black">Hi Greg. Here is a tip for you. When I used to rebuild A-Type overdrives, I would "lap in" the surface that the ball sits on. I had a spare ball of the correct size, and I welded a small rod to it (about 3/16" diam.). Then I put a bit of valve grinding compound on the ball, inserted it down into the hole, then turned it back and forth, thus lapping the surface that the ball sits on. This is a tip that Hardy Prentice gave me years ago, when we were both racing, and obviously the purpose was to minimize any leakage past the ball. This may be to late in your case, as you would have to do this while the unit is apart, so that you can carefully clean all of the grinding compoound out of the housing after the lapping. Maybe this will help you next time. Good luck.</span><o:p></o:p></p></div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:black">Jack Wheeler</span><o:p></o:p></p></div><div id="yiv8470877085ydp70470255yahoo_quoted_0759735189"><div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:#26282A">On Monday, March 5, 2018, 12:12:29 AM EST, Greg Blake via Fot <<a href="mailto:fot@autox.team.net">fot@autox.team.net</a>> wrote: </span><o:p></o:p></p></div><div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:#26282A">All knowing FOT</span><o:p></o:p></p></div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:#26282A">Attached is a video of my Type A OD unit ready to bolt up to the transmission. I decided to do a pressure test with 120psi of compressed air plumbed into the operating vale port. </span><o:p></o:p></p></div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:#26282A">The engagement seems to work well when I move the operating lever. But I am concerned about the amount of air that can be heard leaking. I believe it is going past the relief valve. Is this abnormal amount of leaking?</span><o:p></o:p></p></div><div><p class="MsoNormal" style="background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:#26282A">I noticed upon tear down that the nonreturn valve had a 1/4" ball instead of the 5/16" this unit should have had. The test you see in the video is with a new 5/16" ball. I am sure on a previous rebuild someone mistakenly used the later style 1/4". </span><o:p></o:p></p></div><p class="MsoNormal" style="margin-bottom:12.0pt;background:white"><span style="font-size:10.0pt;font-family:"Helvetica","sans-serif";color:#26282A"><br><br>Just wanted opinions before I buttoned this up to the transmission for some bench testing. <br><br>Thanks. <br><br>Greg<br><br>Sent from my iPhone_______________________________________________<br><a href="mailto:fot@autox.team.net" target="_blank">fot@autox.team.net</a><br><br><a href="http://www.fot-racing.com/" target="_blank">http://www.fot-racing.com</a><br><br>Donate: <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br>Archive: <a href="http://www.team.net/archive" target="_blank">http://www.team.net/archive</a><br>Forums: <a href="http://www.team.net/forums" target="_blank">http://www.team.net/forums</a><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com" target="_blank">http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com</a><br><br><br></span><o:p></o:p></p></div></div></div></div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt;background:white"><span style="font-family:"Helvetica","sans-serif";color:black">_______________________________________________<br><a href="mailto:fot@autox.team.net">fot@autox.team.net</a><br><br><a href="http://www.fot-racingcom/" target="_blank">http://www.fot-racing.com</a><br><br>Donate: <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br>Archive: <a href="http://www.team.net/archive" target="_blank">http://www.team.net/archive</a><br>Forums: <a href="http://www.team.net/forums" target="_blank">http://www.team.net/forums</a><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/britcars@bellsouth.net" target="_blank">http://autox.team.net/mailman/options/fot/britcars@bellsouth.net</a><br><br><br><br><br></span><o:p></o:p></p></div></div></div></div></div></div></blockquote><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal" style="margin-bottom:12.0pt">_______________________________________________<br><a href="mailto:fot@autox.team.net">fot@autox.team.net</a><br><br><a href="http://www.fot-racing.com">http://www.fot-racing.com</a><br><br>Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a><br>Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a><br>Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/4msonset@gmail.com">http://autox.team.net/mailman/options/fot/4msonset@gmail.com</a><br><br><o:p></o:p></p></div></blockquote><div class="MsoNormal" align="center" style="text-align:center"><hr size="2" width="100%" align="center"></div><p class="MsoNormal" style="margin-bottom:12.0pt">_______________________________________________<br><a href="mailto:fot@autox.team.net">fot@autox.team.net</a><br><br><a href="http://www.fot-racing.com">http://www.fot-racing.com</a><br><br>Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a><br>Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a><br>Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com">http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com</a><br><br><o:p></o:p></p></blockquote></div></blockquote></blockquote></div></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span><a href="mailto:fot@autox.team.net">fot@autox.team.net</a></span><br><span></span><br><span><a href="http://www.fot-racing.com">http://www.fot-racing.com</a></span><br><span></span><br><span>Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a></span><br><span>Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a></span><br><span>Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a></span><br><span>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/gblake58tr3@icloud.com">http://autox.team.net/mailman/options/fot/gblake58tr3@icloud.com</a></span><br><span></span><br><span></span><br></div></blockquote></body></html>