<font color='black' size='2' face='Arial, Helvetica, sans-serif'>It<font size="2"> probably has the later type shell bearings and 1 or both have worked loose in the laygear housing bore and "milled" into the thrust washer (s).<br>
Glen<br>
</font>
<div> <br>
</div>

<div> <br>
</div>

<div> <br>
</div>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Greg Blake via Fot <fot@autox.team.net><br>
To: Fot <fot@autox.team.net><br>
Sent: Sun, Jan 7, 2018 8:56 pm<br>
Subject: [Fot] TR6 transmission rebuild - counter shaft gears<br>
<br>
I am rebuilding a TR6 transmission and ran into a strange snag. When I removed the countershaft the counter shaft gears did not drop to the bottom of the case. I had to tap on the counter shaft gear set with a brass punch to get them to move far enough to allow the input shaft and gear to be removed. Now that I have the main shaft out of the case, I can't get the counter shaft gears out of the case. I've been able to move them a little bit by tapping on the gears with a brass punch through the drain hole but I can't get them out. Has anyone run into this before?  Any ideas to get them out?<br>
<br>
Thanks. <br>
<br>
Greg<br>
<br>
Sent from my iPhone<br>
_______________________________________________<br>
<a href="mailto:fot@autox.team.net">fot@autox.team.net</a><br>
<br>
<a href="http://www.fot-racing.com" target="_blank">http://www.fot-racing.com</a><br>
<br>
Donate: <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/archive" target="_blank">http://www.team.net/archive</a><br>
Forums: <a href="http://www.team.net/forums" target="_blank">http://www.team.net/forums</a><br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/fot/fubog1@aol.com" target="_blank">http://autox.team.net/mailman/options/fot/fubog1@aol.com</a><br>
<br>
<br>
</div>
</font>