<html><head></head><body><div style="color:#000; background-color:#fff; font-family:Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id="yui_3_16_0_ym19_1_1502464975023_2675">Hi,</div><div id="yui_3_16_0_ym19_1_1502464975023_2762"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2676">I have a set of Group 44 hubs apart for replacing the studs. The ones that were in there were apparently Moroso 46160, 7/16-20 x 3 with a .560 knurl.</div><div id="yui_3_16_0_ym19_1_1502464975023_2689"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2708">I'm looking for 1/2-20 studs with a similar knurl and would appreciate any pointers.<br></div><div id="yui_3_16_0_ym19_1_1502464975023_2716"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2746">Moroso 46180 is 1/2-20, but the knurl is .615, so I'd have to machine the hub flange. I'm trying to avoid machining but I def. want 1/2 inch studs.</div><div id="yui_3_16_0_ym19_1_1502464975023_2777"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2778">TIA!</div><div id="yui_3_16_0_ym19_1_1502464975023_2786"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2794">Regards,</div><div id="yui_3_16_0_ym19_1_1502464975023_2795">Bob Lang</div><div id="yui_3_16_0_ym19_1_1502464975023_2796">339-927-4489<br></div><div id="yui_3_16_0_ym19_1_1502464975023_2747"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2761"><br></div><div id="yui_3_16_0_ym19_1_1502464975023_2677"><br></div></div></body></html>