<p dir="ltr">Yes, it's there. Found it. Says 32 foot pounds.</p>
<div class="gmail_extra"><br><div class="gmail_quote">On May 31, 2017 7:48 PM, "Barr, Scott" <<a href="mailto:sbarr@mccarty-law.com">sbarr@mccarty-law.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Last time I checked,  Pauter had a table on its web site that gave rod bolt torque and stretch specs.  Is it not there anymore?<br>
<br>
Scott (B.)<br>
<br>
<br>
Sent from my Verizon, Samsung Galaxy smartphone<br>
<br>
<br>
-------- Original message --------<br>
From: Peter Vucinic via Fot <<a href="mailto:fot@autox.team.net">fot@autox.team.net</a>><br>
Date: 5/31/17 9:31 PM (GMT-06:00)<br>
To: 'Chuck Arnold and/or Kathleen Kelley' <<a href="mailto:triosan@gmail.com">triosan@gmail.com</a>><br>
Cc: 'FOT' <<a href="mailto:fot@autox.team.net">fot@autox.team.net</a>><br>
Subject: Re: [Fot] ARP rod bolt torque<br>
<br>
Chuck,<br>
Torque/stretch figures should come with the new bolts?<br>
<br>
<br>
From: Fot [mailto:<a href="mailto:fot-bounces@autox.team.net">fot-bounces@autox.<wbr>team.net</a>] On Behalf Of Chuck Arnold and/or Kathleen Kelley via Fot<br>
Sent: Wednesday, 31 May 2017 11:21 AM<br>
To: Friends<br>
Subject: [Fot] ARP rod bolt torque<br>
<br>
<br>
This was the hot oil thread. Tore engine down. Nothing in the sump. Checked all bearings. All ok. Thrust washers ok, but little clearance.<br>
<br>
Now need to torque the ARP rod bolts in the Pauter rods. Looking for help as to what is the proper value.<br>
Thanks,<br>
Chuck<br>
</blockquote></div></div>