<div dir="ltr"><div><div>I just pulled the tranny in my 70 GT6. While it was off I checked the end play at the flywheel (easier than at the front pulley). I'm getting 0.018 so I'm assuming the thrust washer is showing some wear but didn't fall out (yet). I've taken the pan off a Spitfire while it's in the car, I'm assuming I can do that with GT6 but haven't done one yet. <br><br>I'd just like to confirm it's possible before I spend any time on a useless quest or so I just bite the bullet and pull the engine out?<br><br></div>thanks<br></div>mike h<br></div>