<html>I used the mounting kit for Weber's and some longer studs. The kit has the o-rings mounted to an aluminum plate and has the rubbery spacers to hold the carbs snug to the manifold. I just had to elongate a couple of the holes in the o-ring plate and the plate will slide right over 2 diagonally opposing studs. I used a little Hylomar on the o-rings as a little sealant. Joe(B)<BR><BR>-- "BOB KRAMER" <rkramer3@austin.rr.com> wrote:<BR>
<DIV><FONT face=Arial size=2>All I did when I went this route was to use some 2" o-rings I had lying around. I added some slightly longer carb studs and cut a minor recess into the stock phenolic block. Worked perfectly but I suppose I should have created something to fill the gap between the block and the carb body.</FONT></DIV>
<DIV>Bob Kramer<BR><A href="mailto:rkramer3@austin.rr.com">rkramer3@austin.rr.com</A></DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=timmurph@fastbytes.com href="mailto:timmurph@fastbytes.com">Tim Murphy</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=fot@autox.team.net href="mailto:fot@autox.team.net">'FOT'</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, September 23, 2008 7:49 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [Fot] Soft mounts for H6 SU's</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>We had a problem with the front H6 SU going rich at the end of the front straight and in the carousel at Elkhart Lake last weekend so I want to make some soft mounts for the carbs. I'll get the material and O-rings from McMaster-Carr so I have a lot of choices. I was thinking of using a phenolic called Garolite or an acetal. The O-ring material I was thinking of was Viton. Any suggestions? And does the hardness of the O-rings make much diference? There were some threads on this back about 7 and 8 years ago that I looked up in the archives but no specifics on materials.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Tim</FONT></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>Support Team.Net http://www.team.net/donate.html<BR><BR>http://www.fot-racing.com<BR><BR>Fot mailing list<BR>Fot@autox.team.net<BR>http://autox.team.net/mailman/listinfo/fot<BR><BR></BLOCKQUOTE></html>
<font face="Times-New-Roman" size="2"><br><br>____________________________________________________________
<br><a href=http://thirdpartyoffers.netzero.net/TGL2232/fc/Ioyw6ijltMADfJAQzpYWuALtmTzhPjswvNZrZ4ifex2oCVORq3upkO/ target="_blank">Shop now for huge discounts on quality surveillance cameras. Click here!</font></a><br>