[Fot] Weber linkage measurement

[marty sukey]

To anybody running dual Webers on a Spitfire, I am working on a "Sukey special" 🙂 cable linkage set-up and now that it's fitted to the head, I am concerned about bonnet clearance. If anybody is using the typical rod style system and you could give me the height of the front and center linkage to some reference point such as the dowel pins in the head or maybe the butterfly shaft in the carb body so I could compare, it would be a tremendous help to me!
Thanks,
Marty Sukey

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20260503/bcdf1831/attachment.htm>