[Fot] Spitfire and GT6 Bonnets and Triumph parts and shop tools for sale

[Mark Craig - Diesel Performance Parts]

Morning Members,

Ok I am doing a house "AKA Garage" cleaning of Spitfire and GT6 parts and bonnets and tools etc.

I have:

  *   1 round tail GT6 bonnet with louvers, very very good condition
  *   1 square tail GT6 bonnet that was made from a Spitfire bonnet and then the GT6 power bulge was welded into it. Stripped and primed and looks to be 99% rust free. No Triumph was ever rust free even from day one so.........
  *   1 round tail stock Spitfire bonnet, also very very good condition
  *   1 each left and right front wings  "fender portion"  of a square tail bonnet that for some reason were cut off a square tail bonnet. For potential repair for a damaged bonnet maybe?? Don't know why I have them, LOL!
  *   1 GT6 parts car, rusty and missing lost of stuff but the basic car and engine is still there.
  *   1 square tail Spitfire parts car, again pretty rusty but lots of stuff to fix up a race car or street car.
  *   1 GT6 square tail frame totally stripped frame, frame only.


Other stuff I don't even know I have, but these are the big bulky parts that need a home. All of it is in Nashville, Tennessee at my office. I can meet there on weekdays or weekends you can see it all and look thru the 5-7 pallets of other parts I have too. I have 2 square tail race cars that will be gone thru one more time before I retire myself from racing, so some parts stay with me but EVERYTHING else is for sale. I want to offer this to the membership first as you are the guys that keep the Triumph world alive and deserve first pick!! Can't tell ya how much you all and the site has helped me thru the years.

Also a HUGE AIR CAPACITY 120 gallon, 4 cylinder two stage, Champion air compressor, 220V single phase, a 4 foot bead blast cabinet, a 6 foot long steel workbench made from river barge plate steel. A 220V single phase hot water pressure washer fired by kerosene, a ALC 100-pound capacity pressure pot sand blaster and more all in good operational condition. I have a forklift to load too.

My contact info is below in my signature.

[cid:image001.png at 01DBEFFA.C34CE2E0]<https://www.dieselperformanceparts.com/>

Mark Craig
Diesel Performance Parts, Inc.
411 Allied Drive, Nashville, TN 37211
https://www.dieselperformanceparts.com/
[cid:image002.png at 01DBEFFA.C34CE2E0]<https://www.facebook.com/dieselperformancepartsinc>


Phone: 615-834-0066
Fax: 615-834-9923
Email: mark at dieselperformanceparts.com<mailto:mark at dieselperformanceparts.com>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20250708/24b911df/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 18269 bytes
Desc: image001.png
URL: <http://autox.team.net/pipermail/fot/attachments/20250708/24b911df/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 791 bytes
Desc: image002.png
URL: <http://autox.team.net/pipermail/fot/attachments/20250708/24b911df/attachment-0001.png>