[Fot] TR-4 valves

[vfracing at aol.com]

 Hi Tony;
We've had good luck getting valves made by Manley.  Service is good.  Best thing to do is send an old valve to them to copy.  Stems run about .001 larger diameter than the Triumph valves.  Not a problem.  Neil Vernarelli there is good to work with.  neilv at manleyperformance,com
Regards,
Phil
    On Thursday, January 9, 2025 at 03:40:25 PM EST, Tony Drews via Fot <fot at autox.team.net> wrote:   

 I know this has been discussed, but in searching my saved messages I'm 
finding conflicting information.  BPNW and Moss no longer can get the 
stainless steel oversized valves for TR-4's. I'm looking for a source 
for 36 mm Exhaust and 41 mm intake valves.

Recommendations?

Regards, Tony Drews


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20250109/b9bfd1f6/attachment.htm>