[Fot] 69 TR6 racecar

charly at mitchelplumbing.com charly at mitchelplumbing.com
Wed Oct 2 13:31:29 MDT 2024


The Triumph Experience link didn't work, we can try this one.
https://www.triumphexp.com/forum/buy-sell-and-trade-forum.5/1969-tr6-racecar.2039041/
Charly Mitchel
TR6 #44

-----Original Message-----
From: Fot <fot-bounces at autox.team.net> On Behalf Of Charly Mitchel via Fot
Sent: Wednesday, October 2, 2024 10:08 AM
To: fot at autox.team.net
Subject: Re: [Fot] 69 TR6 racecar

Some how the price isn't reflected anywhere.  It has been advertised at $30,000.  I would entertain any reasonable offers that aren't lowball.
Charly Mitchel
TR6 #44


NFI - Charly and his very clean TR6 has been rock solid for many years ! Has won the Sovren points championship a few times. This “ championship “ is based off laps completed.  You have to be at every race and complete every lap.

Be nice if this car stays in the PNW … but someone going to get a sorted car :-) Sent from my iPhone

> On Oct 1, 2024, at 8:07 PM, Charly via Fot <fot at autox.team.net> wrote:
>
> 
>
> Foter's et al;
> I have my '69 TR6 racecar up for sale.   I've raced it for 21 years, won 6-1st place, 3-2nd place & 3-3rd place  class wins with it.
> I raced 136 vents in it and it has been a very good car.
> https://youtu.be/otJ4l36ZzCU?si=VWfQaEjpSiBQd9MX
> here are the details:
>
> Raced since 2003, earlier history back to 86 Fresh motor, roller 
> rockers, 12:1 CR, D9 cam, forged crankshaft, aluminum oil pan, 6-3-1 
> header Close ratio 4 speed, Tilton clutch, lightened steel flywheel, 
> API dampener, aluminum water pump housing Aluminum front and rear bear 
> plates, aluminum radiator, spin on oil filter, SS hoses, oil cooler 
> Reinforced chassis, 3.70 diff with Trans-X LSD, Corvair axels, 
> aluminum brake drums, slotted drilled rotors
> Chassis: Reinforced rack mounts Reinforced lower control arm mounts 
> Roll bar mounts Gusseted at swing arm mounts Reinforced differential 
> mounts Boxed shock mount crossmember On-board fire supression system
> Suspension: Quick steering rack solid rack mounts XJ6 upper balljoint 
> Goodparts lower fulcrum mount lowered front springs adjustable front 
> shocks w/poly bushings GoodParts front anti-sway bar Poly bushings 
> upper and lower control arms Adjustable rear swing arm mounts Poly 
> bushing swing arm Adjustable Armstrong rear shocks w/poly bushings 
> Corvair rear stub axels 2-7/8” rear wheel studs Lowered rear springs 
> GoodParts adjusatble rear anti-Sway bar 3.70 Tran-X differential, 
> spare 4.10 differential included Solid poly diff mount
> Brakes: Drilled/slotted front rotors Porterfield R-4 pads Strengthened 
> front axel stubs Aluminum front hubs 2-7/8” front wheel studs Copper 
> heat sinks on calipers Air duct from front apron Finned aluminum rear 
> drums 7/8” rear brake wheel cylinders Porterfield R-4 relined rear 
> shoes Braided SS hoses, front & rear
> Engine: Original block Farnadon billet crank, lightened, 50 lbs Max 
> Speed rods .020 pistons, assemblies balanced to 1 gram ARP rod bolts 
> Goodparts ATI damper Aluminum front and rear bear plates Aluminum 
> water pump housing D9 cam from Delta Cams Vernier adjustable cam 
> sprocket
> 2 piece Goodparts timing cover, for adjustment Bastuck cast aluminum 
> finned oil pan Shaved head 3.31 inches thick, est CR 12:1 ARP head 
> bolts Gas flowed large intake and exhaust valves High lift dual valve 
> springs Roller rocker arms, 1.65:1 Aluminum valve cover Lightened 
> steel flywheel w/ARP bolts Lucas Sport Coil Pertronix rev limiter 
> Spin-on oil filter adaptor w/K&N filter
> Cooling: Wizard aluminum radiator, stock mounts Electric fan GoodParts 
> aluminum radiator shroud 13 row oil cooler w/SS braided hoses
> Fuel: Triple Weber carbs, Italian made Cold air duct from radiator 
> shroud Double ended fuel pump Wix cartridge style fuel filter
> 1 liter swirl tank FuelSafe fuel bladder in stock tank and location 
> Holley fuel pressure regulator with gauge
> Clutch: Tilton 7 ¼ clutch Tilton T.O. bearing w/custom sleeve 
> Adjustable clutch slave cylinder pushrod Braided SS hose Metal 
> transmission tunnel, TR3 Exhaust
> 6-3-1 heat coated Goodparts header straight thru dual exhaust 
> removable glass pack dual muffler
>
> https://feature.vintagetriumphregister.org/classifieds-3/place-ad/?ste
> p=finish&listing_id=2231&transaction_id=010362d17b70b679bccc1f8f8d5aec
> 81
>
> https://www.facebook.com/marketplace/item/1043530500459756   https://www.facebook.com/marketplace/item/468179549302966
>
> https://www.triumphexp.com/forum/buy-sell-and-trade-forum.5/1969-tr6-r
> acecar.2039041/
> <1405097978716.jpg>
> <1400863090046.jpg>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com/
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive 
> http://www.team.net/pipermail/fot
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/vintageclassicsus@outlook.co
> m
>
>



More information about the Fot mailing list