[Fot] Heads Up! Fire System Requirements for Kastner Cup

Wed Feb 21 05:58:27 MST 2024

Phil,Good point.  You are correct and thanks for the clarification.I tend to be more conservative to a fault (my CFO background). So, relative to how much is spent on tires, gas, oil, other consumables and basic repairs every race season, top notch safety equipment is a cheap investment for me.  And, most  important, the sanctioning body that allows me to drive and I have been married to for over 40 years,  appreciates it!So, if going to the trouble to install a system, I might as well have it be a FIA system.I send the valve with the bottle when serviced every two years.   They put a new sticker with dates on the bottle.Thanks!MarkSent from my Galaxy
-------- Original message --------From: Philip Gott <vfracing at aol.com> Date: 2/21/24  7:17 AM  (GMT-05:00) To: Mark Cook <mecook at mindspring.com> Cc: fot at autox.team.net Subject: Re: [Fot] Heads Up! Fire System Requirements for  Kastner Cup Mark;To clarify, SCCA only recommends FIA and/or SFI certification. As the SFI recertification process is largely a joke (send a photo of your bottle and gage along with  check for $35 to the manufacturer and you get a new certification sticker by return mail) they only recommend it. They do require that the manufacturers’ service procedures be performed on the valve and actuation system, but these are neither part of the recertification process nor verifiable other than the owner’s word.SVRA is requiring that the SFI or FIA  recertification process be followed.Phil Sent from my iPhoneOn Feb 21, 2024, at 2:47 AM, Mark Cook via Fot <fot at autox.team.net> wrote:@font-face { font-family: Calibri; }
@font-face { font-family: Tahoma; }
p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif; }
a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }
a:visited, span.MsoHyperlinkFollowed { color: rgb(149, 79, 114); text-decoration: underline; }
p.MsoPlainText, li.MsoPlainText, div.MsoPlainText { margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif; }
span.EmailStyle17 { font-family: Calibri, sans-serif; color: rgb(31, 73, 125); }
span.PlainTextChar { font-family: Calibri, sans-serif; }
.MsoChpDefault { font-size: 10pt; }
@page WordSection1 { size: 8.5in 11in; margin: 1in; }
div.WordSection1 { page: WordSection1; }SVRA has required a plumbed in onboard fire system since 2020 (with at least two nozzles).  With the calendar year 2020 being a grace period, it then became mandatory in 2021.  For 2024, they added additional FIA and SFI requirements to become consistent with NASA and SCCA. Having built a car to meet SCCA, NASA and BMW Club racing requirements, would not get in a race car without a fire system.  Cheap insurance. Just for reference, the turnaround time for re-certifying/servicing fire bottles is actually pretty quick.  I dropped my SPA Extreme Novec 1230 off at UPS on Dec 21 and had it back by Dec 30.  My Lifeline Novec 1230 was sent to Lifeline on Jan 12 and had it back by Jan 18, also by UPS ground.  Ever since Mark Petronis’ accident at NJMP in 2021, most sanctioning bodies are beefing up fire system requirements.  SVRA was a little slow. https://www.youtube.com/watch?v=DUS5tYBLycc Mark Cook   From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Ken Knight via FotSent: Tuesday, February 20, 2024 5:01 PMTo: Brad EellsCc: FOT TriumphSubject: Re: [Fot] Heads Up! Fire System Requirements for Kastner Cup I called my company, Safecraft, and my bottle is just beyond when they will recertify again.  So $640 and the new bottle is on order.  They were kind enough to direct me to Summit Racing where I got it cheaper than direct.  All is in stock and they are just up the 101 from me in the bay area so I should have it in plenty of time.  Systems at Pegasus were running $750-1200 if you needing the full kit with 2 pulls.  Just FYI. It is not that I mind doing this, I witnessed a car fire during a race last year (fire suit saved the driver from injury).  It is dropping this on us at the last minute that is the problem.  I doubt they just thought up this rule last week, and possible folks within SVRA knew about this, but we did not. I hope this does not cause problems for anyone else trying to make the K Cup and facing a long tow. Ken Sent from Mail for Windows From: Brad EellsSent: Tuesday, February 20, 2024 1:37 PMTo: Ken KnightCc: vfracing at aol.com; FOT TriumphSubject: Re: [Fot] Heads Up! Fire System Requirements for Kastner Cup Interesting, as this may be an issue for the K-Cup this year. Running at Sonoma with SVRA 8 weeks from now. That said, when rebuilding the Spitfire, I chose an SPA aqueous foam system with 4 distribution nozzles and 3 actuators; one outside, one on the dash and the bottle handle itself. Brad EellsSent from my iPhone On Feb 20, 2024, at 3:31 PM, Ken Knight via Fot <fot at autox.team.net> wrote:So with a very short time get this done, this is the New rule?  Had we known this, oh say last fall, it could have been a winter project.  Some of this is not hard but sending your system off to get a recertification could very well be a major problem in these times.  So what is the alternative, buy a new system?  Some of us have already committed to race with our home clubs in mid March, then it is a short turn around until Sonoma.  Pretty well leaves us in a major bind as far I can tell, not to mention a potential large expense. We were encouraged to sign up for the K Cup with SVRA, plus Laguna, under the assumption that if our cars were legal in our home clubs they would be allowed to run as is.  Dropping this mandatory rule on us at the last minute does not sit well.  No one wants to be unsafe, I don’t think the rule is that unreasonable, but the timing to get this done is unreasonable. Ken Sent from Mail for Windows From: vfracing--- via FotSent: Tuesday, February 20, 2024 12:46 PMTo: FOT TriumphSubject: [Fot] Heads Up! Fire System Requirements for Kastner Cup Advanced warning:The SVRA rules on fire systems are much more strict than SCCA and some of the other sanctioning bodies such as VRG.  Notably, plumbed in systems are required, and they must have two activation points, one accessible to the driver and the other accessible to a course worker without having to lean into the car.  Furthermore, they must be re-certified every two years.  Note that these are requirements, not recommendations, and new this year (2024) For more detail, please see Section L of Safety Requirements at https://svra.com/wp-content/uploads/2024/01/SVRA-General-Rules-1_24.pdf. Regards, Phil Gott _______________________________________________fot at autox.team.nethttp://www.fot-racing.comDonate: http://www.team.net/donate.htmlArchive: http://autox.team.net/archive http://www.team.net/pipermail/fotUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr4abrad@gmail.com _______________________________________________fot@autox.team.nethttp://www.fot-racing.comDonate: http://www.team.net/donate.htmlArchive: http://autox.team.net/archive http://www.team.net/pipermail/fotUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20240221/ef44de3a/attachment.htm>