[Fot] Odd tool in a pouch

[J Wagner]

yes, it’s a carb balancing kit.

You remove the caps on your SU’s/Stromnergs and seat a tube into each reservoir… then put the vent wire end into the top of the tube… 

you angle the long horizontal rods toward each other.

Tweak them so they’re inline with each other.

Now you start your already warmed up car.

you  can now balance your carbs by adjusting them so they’re rising equally.

works on dual or triple carb set ups.

Handy if you don’t want to remove filters.

Also helps diagnose sticking carbs (w/o removing filters) as you can readily see how smoothly they’re rising, etc.

—Justin 





> On Dec 6, 2024, at 12:45 PM, Jack Brooks via Fot <fot at autox.team.net> wrote:
> 
> 
> I was going through some tools in my shop and came across a small pouch with an odd collection of pipes and pins, but I have no idea what it is for.  The pipes are about 5 inches in length. One picture in the pouch and one fully laid out.  Yes, the tubes do assemble.
>  
> Does anyone recognize this tool?
> 
> Jack 
> <PXL_20241205_231422686.jpg>
> <PXL_20241205_231322919.jpg>
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/4msonset@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20241206/7f59a3bc/attachment.htm>