[Fot] TR4 head milling

[Steven Belfer]

I have 1 head with 190 off and another with over 200 off and they work well, not staked.  Maybe I got lucky.  There’s not any room left for skimming which means they’re mostly used up. 

~Steve Belfer 


> On Apr 5, 2024, at 7:52 PM, tr4 via Fot <fot at autox.team.net> wrote:
> 
> 
> I have never had to go that far.  The problem would be not the combustion chamber but the flat surface would be way too thin and collapse in short order.  You would be much better off with popping the piston or go with a slight done to get that level of compression.
> 
> 
> 
> Sent via the Samsung Galaxy S23+ 5G, an AT&T 5G smartphone
> 
> 
> -------- Original message --------
> From: GREGORY THOMPSON via Fot <fot at autox.team.net>
> Date: 4/5/24 6:36 PM (GMT-06:00)
> To: FOT Triumph <fot at autox.team.net>
> Subject: [Fot] TR4 head milling
> 
> Has anyone had an issue with breaking into a water jacket on the TR4A head with taking off .150?
> 
> Thank you,
> 
> Greg Thompson 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/steve@artwithcars.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20240405/aef307ff/attachment.htm>