[Fot] A-type OD leaks

Bert Brown moosehd2 at pacbell.net
Sun Sep 24 20:49:40 MDT 2023


 Off topic, but that's FOT member Jerry Barker in the black Spitfire #2 behind your TR3 in the Daytona photo!
Bert Brown    On Sunday, September 24, 2023 at 03:36:11 PM PDT, dustin nicholson via Fot <fot at autox.team.net> wrote:  
 
 Speaking of Bill Boemler, I have his 1955 TR3 racecar. He ran it in the runoffs a couple times in the 60’s, Car last ran in 1973 and has been untouched since, someday I’ll get it back on track. I’m not surprised to learn about his overdrive mods, this car has a lot slick customizations that I’ve never seen before.
Photos attached of it at Daytona 1969 and now.

Dusty Nicholson 281-871-9623

On Sep 21, 2023, at 11:52 PM, R. John Lye via Fot <fot at autox.team.net> wrote:



 
Wow, Bill Boemmler is a name that I recognize from my time in St. Louis.  He was indeed
a skilled machinist and did some really cool tricks just like Jack described.

Thanks,
John   

On Thu, 21 Sep 2023 19:35:35 +0000 (UTC), Jack Wheeler via Fot <fot at autox.team.net> wrote:
  I've read a number of responses to this and all are good ideas.  When I was racing with an A-Type overdrive, I met a guy from St. Louis named Bill Boemmler, a TR-3 racer from the 50's & 60's.  Bill was also a skilled machinist and had a small machine shop behind his house.  Everything I know about the A-Type overdrive, I learned from Bill. The bottom of the adapter plate is fastened by 2 studs, one in each corner.  It generally leaks between these 2 studs.  Bill would drill and tap for two additional small bolts (about 1/2" long), spaced evenly between the 2 studs.  Two holes were drilled in the adapter plate, aligned with two holes which were drilled and tapped into the overdrive housing for a 1/4" - 20 hex bolt.  This, of course, has to be done when the overdrive is apart, and the holes are drilled and tapped into the rear of the O/D housing.  When assembling, it is a tight fit to get these two bolts in between the gearbox housing and the adapter plate, so the bolts need to be short. just long enough to get a firm threading into the O/D housing.  They should be secured with either lock tight or safety wire. This process is a little hard to explain, so if you want a better description either call me or contact me offline.  I had Bill perform this modification on all of my race and street car overdrives, and after this modification, I never had a leak in this area. Cheers, Jack On Thursday, September 21, 2023 at 12:17:01 AM EDT, Joe Boruch via Fot <fot at autox.team.net> wrote:  I have a leaky a-type OD in my street TR4 that looks like it's leaking from near the adapter plate.  I have never taken one apart.  Can I just separate the OD from the trans and replace the gaskets or the adapter plate (I've heard that Quantum Mechanics sells an uprated plate and am checking with John to see if he has one) and then reassemble without needing to take the OD apart further?  There is a youtube video that shows an OD being separated and it looks like it is do able.  Thoughts?  JoeB_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com

 _______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rjl6n@cstone.net

  _______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/nicholsondustin@yahoo.com


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/moosehd2@pacbell.net


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230925/3ddc56bf/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 2576408 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20230925/3ddc56bf/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 166037 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20230925/3ddc56bf/attachment-0003.jpeg>


More information about the Fot mailing list