[Fot] O rings in tr6 strombergs

[Greg Solow]

I believe that Moss Motors has the correct "o" rings in available.  The 
difficult thing about replacing them is getting the retaining springs that 
hold the brass fittings down at the bottom of the damper oil chamber out 
without scoring the sides of the oil chamber.
                                                                             
                                    Greg Solow
----- Original Message ----- 
From: "Scott Janzen via Fot" <fot at autox.team.net>
To: "Scott Janzen" <sjanzen at me.com>; "'Friends of Triumph' Triumph" 
<fot at autox.team.net>
Sent: Friday, October 13, 2023 2:48 PM
Subject: Re: [Fot] O rings in tr6 strombergs


> Should have said brass fittings.
> Sent from my iPhone
>
>> On Oct 13, 2023, at 5:04 PM, Scott Janzen <sjanzen at me.com> wrote:
>>
>> I need to replace the o-rings on the bronze fitting at the bottom of the 
>> carb.  Looks like they are 5/8” ID. Does anyone have the OD or the 
>> thickness dimension? Figured I’d just get some from McMaster.
>> Scott
>> Sent from my iPhone
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/fot/sjanzen@me.com
>>
>>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/gregmogdoc@surfnetusa.com
>
>
>