[Fot] 6 cyl. tappet removal

[Joe Boruch]

 Anthony, while not the same engine or exactly what you asked about, I have used magnets to hold the lifters up on my TR3 engine to pull the cam out.  Still need to take apart the front of the engine and remove radiator to make enough room to work and get cam out.  JoeB
    On Friday, October 13, 2023 at 09:16:04 AM EDT, Anthony Parker via Fot <fot at autox.team.net> wrote:  
 
  Has anyone successfully modified the 6 cyl. heads to allow for tappet removal with the head installed on the block?I would really like to be able to check for tappet and cam wear without the trouble of removing the head.
Thank you,_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jaboruch@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20231013/198c8a97/attachment.htm>