[Fot] Fw: Wheel stud

[robertten1 at aol.com]

   ----- Forwarded Message ----- From: robertten1 at aol.com <robertten1 at aol.com>To: FOT Triumph <fot at autox.team.net>Sent: Wednesday, October 4, 2023 at 01:39:46 PM EDTSubject: Fw: [Fot] Wheel stud
  

   ----- Forwarded Message ----- From: robertten1 at aol.com <robertten1 at aol.com>To: DENNIS WALJE <walje at sbcglobal.net>Sent: Monday, October 2, 2023 at 04:47:51 PM EDTSubject: Re: [Fot] Wheel stud
  Afternoon  Dennis,
The Spit & GT6 studs are the same.  I have the 7/16" studs from the TR6 front and rear on my autocrosser.   Note you will need to modify the double bevel at the seat end of stud for clearance to seat without interference into hubs.Yes they are 1/4"  longer than 3/8" studs.
Good luck,Bob T 
    On Monday, October 2, 2023 at 10:31:41 AM EDT, DENNIS WALJE via Fot <fot at autox.team.net> wrote:  
 
 
Friends

Does anyone have a part number or source for wheel studs on a 68 Mk1 GT6?  

I need the OEM stud 1/4” longer. I am using wider VTO wheels and the inside rear tire is too close to the radius arm. The VTO wheels have acorn lug nuts and I am limited to the OEM 3/8” stud, and the acorn lug nut limits the length. 

Thanks for your help 

Dennis Walje

Sent from my iPhone
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/robertten1@aol.com


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20231004/c70f5b57/attachment.htm>