[Fot] Slave cylinder/master cylinder

[Greg Hilyer]

In my never ending quest to overthink things, I’m curious about the symptoms…
Is it losing free-play (engagement at the top of pedal travel) or getting too much (pedal gets lower and lower)? 
Since you say “first few shifts”, it doesn’t sound to be heat related - can you induce the problem by just pushing the clutch a few times while stationary?
If it’s not as simple as bleeding &/or bad seals I’m thinking of other less obvious scenarios I’ve run into. 
Greg “Lunker” Hilyer
Albuquerque NM

> On May 27, 2023, at 9:08 AM, McKearn McKearn via Fot <fot at autox.team.net> wrote:
> 
> 
> Hi all.
>  Got the GT6 out a few days ago and remembered that I was going to fix the clutch problem I had last fall before I stored it away   but did'nt ..
> So long story short, I don't know if it's the slave cyl or master cylinder but it works fine at first few shifts but as you drive it you get less and less clutch movement.
> Seems like if you let it set a while it will work  again..
> Any ideas?
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/lunkercars@yahoo.com