[Fot] Carb gasket

[fubog1]

 That has to be open, as well as the bowl vent port.
Glen Efinger
 
 
-----Original Message-----
From: WALJE via Fot <fot at autox.team.net>
To: FOT Triumph <fot at autox.team.net>
Sent: Mon, May 15, 2023 9:45 am
Subject: [Fot] Carb gasket

FOT
I am installing Kastner velocity stacks on my new GT 6 motor and need advice on the mounting gasket.  The motor has the dual Stromberg CD 150 carbs.  Should the gasket cover the vent passage to the underside of the diaphragm (small opening on center face of carb)?  The velocity stack base does not cover hole.
Thanks for your advice
Dennis Walje68 GT 6_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230515/99a5644f/attachment.htm>