[Fot] Selling My GT6+ Race Car Project

[Chuck WATSON]

This is going to be a quick and dirty overview.  Looking through my parts and photos it would be a huge undertaking to describe all that I have and have done.  I have acquired literally 98% of what is needed for a full race car and completed bodywork, roll cage, and many other things.  It is basically a car that needs to be put together.

Body/Frame:
Seam welded frame
Body work completed.  Currently in epoxy primer until all racing mods are test fitted.  Then would be ready for disassembly and paint.
Lowered floor pan for tall driver.
Nascar style full roll cage along with body work totaled over $13,000.
Interior fully painted.
Polycarbonate sheets for side/rear windows if desired.
New FG front spoiler (and spare) - not yet fitted

Engine
Rebuild by Hap Waldrop in Greenville SC (Acme Racing).  Acme can complete engine or sell as-is.  New rods from Wishbone, oil enhancement work, new pistons/rings, race cams, etc.  Crank magnafluxed and nitrided.  No expense spared.  Still needs head decked to desired compression ratio, heads ported and then reassembly.
New bespoke Wishbone exhaust.  Bungs for AFR monitors.
New aluminum end plates from Joe Alexander
New lightweight everything - alloy water pump, alternator, etc.
Triple Weber carbs (Spain) with stepped manifold and all hardware (brand new)
Will need radiator.

Gearbox/Drivetrain
TR6 short ratio gearbox purchased from FOT racer.  Newly rebuilt, new synchros.  Bespoke GT6 slave system installed.
GT6 and TR6 prop shafts (take flange from each for conversion)
Rebuilt differential with new Quaife LSD
Spec stage 3 clutch

Suspension
New race shocks and springs
New rear axles from Jigsaw Racing in England (and many other parts from them)
New wheel bearings.
New race bushings.
New aluminum front adjustable wishbones
Assortment of newly powdercoated sway bars.
New HD steering rack and original rack

Other
New Tilton overhung 2 pedal aluminum pedal set with dual MC valves
New ATL fuel cell
New Kirkey seat
Many more items from Ted at TSI, Richard at Goodeparts, Jigsaw, Kai at Wishbone, etc.  All best quality components.
Literally hundreds more items

I have about $60,000 invested.  Listing at $16K firm for all the above and everything else I have, which is a lot. Worth a lot more as parts, but time is money.  Tons of documentation, research materials, photos, notes, books, etc.  Clean title in my name.  Engine in Greenville SC, everything else in Hendersonville NC (30 mins from Greenville).

https://photobucket.com/u/thewatson1/a/d54a6511-7296-44e8-b9f5-a01df0bc6d52


Please contact me directly at clw2000 at msn.com if interested.


Thanks,
Chuck Watson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230308/d9d57be6/attachment.htm>