[Fot] Source for beefed up sway bars

[Jack Wheeler]

 I used a 1 1/8" tubular bar in the front, splined on each end for the aluminum arms.  Less bending and less weight than a solid bent bar.  Check with any speed shop, especially ones that work on Sprint cars.  They use a lot of these bars.  Didn't need a bar in the rear.
JackEP #11

    On Friday, January 20, 2023 at 02:15:58 PM EST, John H. Hasty via Fot <fot at autox.team.net> wrote:  
 
 We make them

Sent from my iPhone

On Jan 20, 2023, at 12:33 PM, Dave Riddle via Fot <fot at autox.team.net> wrote:





My car has way to much body roll so I want to beef up the sway bars.  What is a source?
 
  
 

<image001.jpg> 


Dave Riddle
 
Business IT Consulting
 
Office: 480-610-8234
 
eMail: dave at microworks.net
 
Website: http://www.microworks.net
 

<image002.png><image003.png><image004.png><image005.png> 


  
 _______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty@mhc-law.com


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230121/a9470ea3/attachment.htm>