[Fot] Follow-up: Southwick axle end float

[fubog1]

 Yes this is great info, the retainers that they include are a bit sketchy.
Glen Efinger
 
 
-----Original Message-----
From: DAVE HOGYE via Fot <fot at autox.team.net>
To: Philip Gott <vfracing at aol.com>; Philip Gott via Fot <fot at autox.team.net>
Sent: Fri, Feb 24, 2023 10:28 am
Subject: Re: [Fot] Follow-up: Southwick axle end float

Thanks for sharing this, Phil.
This obviously the correct part that should be used with the conversion.  Southwick should have been supplying this retainer all along.  
Dave H. 

> On 02/24/2023 6:04 AM Philip Gott via Fot <fot at autox.team.net> wrote:
> 
>  
> Here is a photo of the two axle bearing retainers. The silver one is the “Universal” retainer for the Ford 9 inch axle. Note the witness mark of the bearing. The bronze colored one is the retainer for the “small” Ford 9- inch rear.  Much better purchase area.
> Phil Gott
> 
> 
> Sent from my iPhone_______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230224/85851442/attachment.htm>