[Fot] TR-4 front sealing block screw / bolts?

[fubog1]

 Ah the cheese-headed screws, I spot-face the sealing block & use AN flat washers & allen head screws.
Glen Efinger
 
 
-----Original Message-----
From: Tony Drews via Fot <fot at autox.team.net>
To: Amici Triumphi <fot at autox.team.net>
Sent: Sat, Feb 18, 2023 11:46 pm
Subject: [Fot] TR-4 front sealing block screw / bolts?

Anyone have a few extra TR-4 engine front sealing block screws / bolts?  
They are a weird 5/16 course slotted head bolt.  I should have gobs of 
them but don't.  Moss doesn't sell them, and the screw slots are getting 
buggered up in mine.

#43 in this exploded diagram...

https://mossmotors.com/tri-001-external-engine

Looking for a source for good used or new ones.

Regards, Tony Drews

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230219/b29a7b22/attachment.htm>