[Fot] Spitfire 1500 manifold gasket

[vfracing at aol.com]

Good to know about the availability of Remflex by the sheet as well as the fact that they make TR4 gaskets (albeit a bit too big), Tony.  Nice to know also about the BPNE gasket too, Chuck.  Thanks!  Two good options for Mike..
Thanks, Guys!
Phil


-----Original Message-----
From: Tony Drews via Fot <fot at autox.team.net>
To: fot at autox.team.net
Sent: Tue, Sep 20, 2022 1:56 am
Subject: Re: [Fot] Spitfire 1500 manifold gasket

You can by Remflex half sheets and cut them to fit with a sharp knife.  
That material is thick and compressible and hides a multitude of sins on 
the sealing surfaces.  That's what I do for my TR-4 since the pre-cut 
ones for the TR-4 have too large intake holes for my intake manifold.

Regards, Tony Drews

On 9/19/2022 7:54 PM, Philip Gott via Fot wrote:
> Amici;
> An FOT friend is having trouble sealing the intake manifold gasket to his Spitfire cylinder head (1500 head). Moss sells those nice graphite Hi Po gaskets for the wet sleeve 4 and The 6 cylinder engines, but not the Spitfires. Does anyone know of a source of these for the 1500, or if the 6-cylinder gasket will work, and if so, which one?
> Regards,
> Phil Gott
>
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>
>
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220920/966356d6/attachment.htm>