[Fot] Hoosier HOTDR

[vfracing at aol.com]

Dave (62 TR4 #80) and I (65 TR4A #114) with run these in the 23x7.5 x 15 size on 7 inch rims.  They work very well.  They have a very wide margin of slip masking them very predictable and controllable.  No sudden breakaway.  Look at Dave's times at Pitt Race Kastner Cup if you want to know how well they stick. As with most race rubber, they are at their best when new, but with proper break in (24 hours rest after the first heat cycle is the minimum you should do - one week is better) you should get 30-50 heat cycles out of them before they really give up.  The decline is performance is gradual up to about 30 cycles.
We've never run the Toyo R888 so can't compare.
Regards,
Phil Gott

-----Original Message-----
From: Chuck Gee via Fot <fot at autox.team.net>
To: Greg Blake <gblake58tr3 at icloud.com>
Cc: Fot <fot at autox.team.net>
Sent: Sun, Oct 2, 2022 11:10 am
Subject: Re: [Fot] Hoosier HOTDR

I’d like to know this too.  Seems there are less 60 series 15” options compared to 13”.

Chuck

> On Oct 1, 2022, at 1:26 PM, Greg Blake via Fot <fot at autox.team.net> wrote:
> 
> Are any of the TR guys using these?  What size on the TR3/4 and how do they compare to the Toyo R888?
> 
> Thanks Greg 
> 
> 
> 
> Sent from my iPhone_______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/chasgee22@gmail.com
> 
> 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20221003/42356428/attachment.htm>