[Fot] Fw: TR6 steel synchros

[Greg Blake]

You know I’m in for a set. Tired of crap synchros in a new rebuild. 
Thanks for taking on the project Rick. 

Sent from my iPhone

> On Jun 5, 2022, at 12:56 PM, Rick Parent via Fot <fot at autox.team.net> wrote:
> 
> 
> 
> These Synchro rings will fit all the Big Triumph transmissions and they should be available in 6-8 weeks. I do hope there is more interest in these than the Spit / GT6 Synchro's, those sales have been quite underwhelming so far unfortunately. BPNW is carrying the Spit rings as an FYI.
> 
> I believe there is a real need for parts like these because the OEM stuff is long gone and todays aftermarket parts are real junk. I am building a product line of all sorts of different manufacture's Synchro rings and the Triumph rings were first just because I have been involved in with racing Triumphs for 25 years and have been wishing someone else would have done the work and spent the money to develop parts like this. It's way easier to buy parts than go through the expense, development and time not to mention gambling that guys will see the value and buy them and I hope is worth it for me to do this. There are many transmission conversions out there now and it's mainly because of the synchro issue. 
> 
> The rings will cost $85 each which is a lot compared to a $15 aftermarket ring but they actually work and should be the last rings you will ever need. Adding $300 to a transmission build is nothing when you know it's going to work and less than nothing when you are considering a $3000-5000 conversion kit.
> 
> 
> This is what I have going on at the moment
> 
> Spit / GT6 "large" Rings $85 each in stock
> Big Triumph Rings $85 each 6-8 weeks out
> Datsun L series 68-82 by the end of the year
> T10, standard and super, by the end of the year
> Porsche 910 - 2023
> Porsche 915 - 2023
> Muncie M21 / 22 - 2023
> Jaguar E Type - 2023
> T5 - 2023
> T9 - 2023
> BMW 2002, 318, 320 - 2023
> 
> If I don't sell enough Triumph rings I will not be making these
> 
> MGB ?
> Mini / Sprite ?
> 
> Rick Parent
> 
> "Doing the right thing is always the right thing, regardless of consequences"
> 
> 
> 
> On Saturday, June 4, 2022, 04:34:06 PM MST, Jason Sukey <jsukey at gmail.com> wrote:
> 
> 
> Amici,
> 
> I've gotten my hands on a set of Rick Parent's steel, carbon faced TR6 synchros.
> 
> Both my race GT6 and my street 2.5L GT6 use the TR6 gearbox; I've been following his development with great interest. 
> 
> I've installed the synchros in the gearbox from my racecar, and am running that box in my street GT6 for testing purposes prior to Kastner Cup.  
> 
> They fit well to the gears,  no rocking like the out of round repro parts.  Hand fitting to the gears they clearly have a stronger "bite" than even good original parts.
> 
> For the past couple days, I've been driving it around like a madman to see what they will do.   So far, I'm impressed- they take a ham fisted, non rev matched, too fast jam into first gear without any drama.  Fast shifts up and down thru the gears feel great too.
> 
> I'm awful excited to give them a proper stress test at Pittrace.
> 
> I don't have any financial interest in these,  but I am sharing because I feel all of us racing with a TR gearbox stand to benifit.
> 
> 
> Jason Sukey 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gblake58tr3@icloud.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220605/c0fa1123/attachment.htm>