[Fot] TR6 door trim

[J Wagner]

some spitfires too.

> On Jan 3, 2022, at 7:08 PM, Rich Hahn via Fot <fot at autox.team.net> wrote:
> 
> 
> I have put them on every TR I have had with the exception of my TR8.  TR3A, TR4A, TR6, GT6 and even my wife's Sunbeam Alpine!!!  They work and look good.  They used to be unavailable new so you had to search the swap meets for them.  I think they were only original on some 4A's but I might be wrong on that!!
> 
> On Monday, January 3, 2022, 09:21:41 PM EST, Charly via Fot <fot at autox.team.net> wrote:
> 
> 
> So what I did on my TR6 racecar is installed a https://mossmotors.com/handle-door-pull-chrome?assoc=41364 , the holes are in the door, just need to install a couple of 
> https://mossmotors.com/spire-nut-handle-screw?assoc=41366 and use https://mossmotors.com/screw-handle-to-door?assoc=41365
> 
> I know its non-original, but makes sense for early TR6's
> 
> Charly Mitchel
> TR6 #44
> 
> On Mon 03/01/22  5:24 PM , Terry Sopher via Fot fot at autox.team.net sent:
> > Scott - TRF has the correct door top vinyl padded covers and the
> > required clips…and tool to seat the clips.
> > On Jan 3, 2022, at 17:24, Scott Janzen via Fot  wrote:
> > 
> >  ok, so it’s not a race car question, but I’ trying to finish
> > up work on my 1970 street tr6 so that I can get to the race car. I
> > stripped the doors down to have them repainted and am now putting them
> > back together.At the top of the doors, on the inside between the
> > window seal and the door panel, there was foam-backed black vinyl
> > glued on and with lower edge tucked behind the door panel and upper
> > edge behind the window seal.It’s in bad shape and I need to replace
> > it.  I may just end up getting some vinyl and foam but I’m trying to
> > figure out what’s correct. 
> > Moss shows a piece for the earlier cars with a molded-in handle.  Mine
> > didn’t have that.
> > door-pull-left-foam-pad-reproduction-replaces-855-015 [1]The later
> > cars show door top capping - looks more like what I had, but looks
> > like it’s a rigid piece.  door-top-capping-right [2] 
> > What’s correct?  At the moment, I just have nicely painted body
> > color sheet metal between the door panel and the window seal, looks
> > kind of nice but out of place with no other exposed metal in the car.
> > Scott
> > 
> > _______________________________________________
> > fot at autox.team.net
> > http://www.fot-racing.com
> > 
> > Donate: http://www.team.net/donate.html
> > Archive: http://autox.team.net/archive
> > http://www.team.net/pipermail/fot
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/fot/terrysopher@gmail.com
> > 
> > 
> > Links:
> > ------
> > [1]
> > https://mossmotors.com/door-pull-left-foam-pad-reproduction-replaces-855-01
> > 5[2] https://mossmotors.com/door-top-capping-right
> > 
> > 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/putinbaytr3@yahoo.com
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/4msonset@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220103/c16244a6/attachment.htm>