[Fot] TR6 door trim

[Terry Sopher]

Scott - TRF has the correct door top vinyl padded covers and the required clips…and tool to seat the clips.

> On Jan 3, 2022, at 17:24, Scott Janzen via Fot <fot at autox.team.net> wrote:
> 
> ok, so it’s not a race car question, but I’ trying to finish up work on my 1970 street tr6 so that I can get to the race car. 
> I stripped the doors down to have them repainted and am now putting them back together.
> At the top of the doors, on the inside between the window seal and the door panel, there was foam-backed black vinyl glued on and with lower edge tucked behind the door panel and upper edge behind the window seal.
> It’s in bad shape and I need to replace it.  I may just end up getting some vinyl and foam but I’m trying to figure out what’s correct.
> 
> Moss shows a piece for the earlier cars with a molded-in handle.  Mine didn’t have that. door-pull-left-foam-pad-reproduction-replaces-855-015
> The later cars show door top capping - looks more like what I had, but looks like it’s a rigid piece.  door-top-capping-right
> 
> What’s correct?  At the moment, I just have nicely painted body color sheet metal between the door panel and the window seal, looks kind of nice but out of place with no other exposed metal in the car.
> 
> Scott
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/terrysopher@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220103/fb230d4f/attachment.htm>