[Fot] maxpeeding rods

[Jason Sukey]

Nick,
I've built a couple TR3/4 engines using those rods.   No issues with 87mm
bores.

Jason


On Thu, Aug 18, 2022, 6:15 PM Nick Black via Fot <fot at autox.team.net> wrote:

> fellow triumphers,
>
> I'm in the process of building a "stockish" TR4 motor. The stock rods need
> to be rebuilt so I thot I'd use a set of Maxpeeding rods as they are not
> much more money than the cost to rebuild the stockers. Has anyone used a
> set of these in an 87mm sleeve? Will they fit down the bore or are they too
> wide to fit without going to a larger bore?
>
> if its not one thing, its another...
> Nick in NorCal
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/jsukey@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220818/218bce14/attachment.htm>