[Fot] GT6 Trani removal

[Barr, Scott]

Before I put that trans in Col. Mustard, I had stock transmissions in and out of the car like popcorn, mostly, if not always, without pulling the engine.  Both 4-speeds and at least one with a D-type OD.  With the small boost in power over stock, and the heavy track day use, they just didn't last.  That's why I finally put the Toyota trans in.

IIRC, I put the Toyota trans in when I rebuilt the engine around 2001, so I don't have any experience taking the Toyota trans out through the cockpit.  It's a heavy sumbitch, compared to the stock trans, but I bet it could be done with enough willing hands.

Scott (B.)

Scott Barr
McCarty Law LLP
(920) 257-2233
________________________________
From: Fot <fot-bounces at autox.team.net> on behalf of McKearn McKearn via Fot <fot at autox.team.net>
Sent: Wednesday, November 24, 2021 10:40:04 PM
To: FOT list <fot at autox.team.net>
Subject: [Fot] GT6 Trani removal

Hi group.
  I had what I suspect is a clutch failure in my GT6.  TR6 engine with Toyota T50 trans. My question is can I remove the trans, from inside the car or do I need to pull the engine?  I have never done it before without pulling the engine but I would like to this time..This is a street car ..
                          Thanks.  P.J.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20211125/e97d4187/attachment-0003.htm>