[Fot] TR3 Race pistons and liners

[Erik Jacobsen]

Good morning FoT!Karen and I are working on the TR3 race car, and are looking for your advice on pistons and liners for it. We are attempting to build a (semi) streetable race motor for our 3. It has a Crane 244-310-8 cam, and the head has been ported and is running big valves, so we are figuring the compression should be in the 10.5-11.5:1 range. It has H-beam rods and a worked crank, but we will still keep the revs under 6500 in an attempt to keep it all in one piece. There seems to be very little info on what people are running for race pistons floating around on the net.  
Thanks!Jake & Karen Jacobsen 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20211109/d2c4524c/attachment-0002.htm>