[Fot] [TR] would any of you re-use head studs?

[Jack Wheeler]

 Hi Phil.  I used the same exact process when installing the steel shim head gaskets on my TR-4 race car all those years ago.  2 studs, head gasket, rest of studs (all gasket surfaces and the block liberally smeared with Gaskacinch gasket sealer), then the cylinder head (also smeared with Gaskacinch)..  Worked then, sounds like it still works now.  Some things never change.
Jack

    On Tuesday, March 9, 2021, 6:50:31 PM EST, Phil Gott via Fot <fot at autox.team.net> wrote:  
 
 I had been re-using stock head studs with no problems. But I found that the ability to install the ARP head studs with an Allen hex wench made it far easier to install the studs. I only put in two studs, then the pre treated head gasket, then the other head studs and finally, the head itself. Because the steel shim gaskets that I use are such a precision fit on the studs, it is easier to install the gasket if there are only two studs in place.  And yes, I re use the ARP studs. Phil Gott‘65 TR4A HRG Group 3.

Sent from my iPhone

On Mar 9, 2021, at 3:53 PM, Scott Janzen via Fot <fot at autox.team.net> wrote:




I re-use the ARP head studs.  Don’t have any stock “critical" bolts/studs in my race engine.

On Mar 9, 2021, at 3:48 PM, Henry A. Morrison via Fot <fot at autox.team.net> wrote:
In 39 years of British cars, I've never replaced a head stud, never had a head stud failure.  Broken most everything else...........except for coils, never had a bad coil............
Henry Morrison
Sent from Outlook

From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Greg Lemon <grglmn at gmail.com>
Sent: Tuesday, March 9, 2021 12:14 PM
To: Cliff Hansen <cliff_hansen at outlook.com>
Cc: list Triumph <triumphs at autox.team.net>
Subject: Re: [TR] would any of you re-use head studs? I know some people always replace them, I have never replaced them and never had a problem with head gaskets or heads--the includes Sprite/Midget, MGB, 4 and 6 cylinder TR, and big Healey.
Somebody, maybe Randall, said run a good nut up and down the thread, if stretched it will bind.
Greg Lemon, TR250
On Tue, Mar 9, 2021, 1:06 PM Cliff Hansen <cliff_hansen at outlook.com> wrote:

I respect your collective advice and experience. The 4A’s head is at the machinist for a cleanup (head gasket failure). Would any of you re-use the head studs, or would you replace them? They are likely original, and even if not, have been in place for at least 25 years. I have my thoughts on this, but am interested in yours. Thanks, Cliff  Sent from Mail for Windows 10 ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210310/415615d7/attachment-0003.htm>