[Fot] Distributor centrifugal advance curve for race engine
timmmurphh at gmail.com
timmmurphh at gmail.com
Fri Mar 19 16:27:51 MDT 2021
What advance curve are folks using in their race engines? I have 87mm
pistons, a Kastner G3 cam and about a 12:1 compression ratio. I am using
about 19 degrees advance at idle (no centrifugal advance) and 30 degrees
advance at 3000 RPM. I don't know what I have at higher RPM's because I
never looked. I'm currently doing an engine rebuild so I will have to look
what I've got at the higher RPM's when I get the engine running. I'm curious
as to what others are using and if anyone has done any testing on a dyno
with different advance curves.
Thanks in advance for your input.
Tim Murphy
#317 BRG TR4
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210319/6f5671e9/attachment-0002.htm>
More information about the Fot
mailing list