[Fot] TR6 Piston Rings
vfracing at aol.com
vfracing at aol.com
Wed Jun 23 07:30:38 MDT 2021
Total Seal has worked well for me in an Acura Integra (ITA) and HP 948 Sprite.
The critical factor is piston speed. Total Seal rings are thinner than most others (2 rings per land) and so are more prone to fluttering at high piston speeds. At street-range revs this should not be an issue in the TR6.
Phil Gott
-----Original Message-----
From: Robert Lang via Fot <fot at autox.team.net>
To: FOT Triumph <fot at autox.team.net>
Sent: Wed, Jun 23, 2021 5:27 am
Subject: Re: [Fot] TR6 Piston Rings
All set - TNX everyone.
Follow-up: Is Total Seal a good solution for a street engine? I have zero experience with those.
Regards,Bob Lang
On Tuesday, June 22, 2021, 7:26:11 PM EDT, Robert Lang via Fot <fot at autox.team.net> wrote:
Hi,
I built an engine for a club member over the winter and the Grants rings failed during break-in.
I'm looking for a set of Hastings or (maybe) Deves rings for TR6 with .030 over pistons.
The vendors that I checked list the Hastings parts as back-order.
I gotta get this freekin car out of my garage!!!
Regards,Bob Lang339-927-4489
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/robertlangtr6@yahoo.com
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210623/e5e6e15e/attachment-0003.htm>
More information about the Fot
mailing list