[Fot] Help With Wiper Motor Parts

[DAVE HOGYE]

Hi Jack,
I have boxes of wiper motors and spare parts.  I'll lay my hands on what you need and get back to you.   
Dave H.
831-234-4928


>     On 12/07/2021 9:33 AM Jack Wheeler via Fot <fot at autox.team.net> wrote:
> 
> 
>     Cleaning and painting on my Morgan, I today discovered that a couple of very small parts that I had left sitting on my work bench have apparently disappeared.  They probably got scooped up with some papers and got tossed in the trash.  The wiper motor on my 1967 Morgan is the same as the one used on most all TR's up to 1967.  If anyone has some old wiper motors apart and would be willing to sell the parts, let me know.  Or if anyone knows of a business that works on these  old wiper motors and may stock new parts, please let me know as well.
> 
>     The pieces I am looking for are the little contact, which sits atop the rod connecting the gear to the crosshead and rack, and rotates around with the gear, completing the electrical circuit.  I believe this is used to establish the park position for the wipers.  When you remove the top cover and round cap, this is the little piece sticking up on top of the gear.  It makes contact with the inside of the round cap when all is assembled.  I also need the little clip that holds the above part in place atop the gear.
> 
>     The factory parts book does not show these parts.  It does show the rod (part number 503601) which the clip holds in place.  Thanks for any help you can give me on this.
> 
>     Jack
>     _______________________________________________
>     fot at autox.team.net
> 
>     http://www.fot-racing.com
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20211207/81f7147a/attachment.htm>