[Fot] portable single post lift

[Bill Tobin]

Hi again. The next post shows a car not in the best position! When 
working on my 2 post Rotary lift, I raise the car a few inches and shake 
the heck out of the thing to see if it stays put. Then raise and work on it.

I doubt you'll get a 6 foot lift in a movable lift. I doubt I'd trust it.

I do have a scissors lift that I use; changing wheels, brakes, and minor 
work. If I'm going to be under it I use jack stands also. Better safe 
than crushed. It works well with my Barracuda.

Cheers, Bill

On 12/3/2021 12:35 PM, Henry Giffin via Fot wrote:
>
> FoT, I am again getting serious about getting a single post movable 
> lift.  I’m looking for the one that rolls under the car (not the ones 
> with full ramps).  I believe I saw one where the part that goes under 
> the car folds up to allow stowage against a wall.  Looking for 6 ft or 
> more of lift.  I went on line but couldn’t find it (I can’t find much!).
>
>      Thanks in advance for your help, Hank
>
> Hank Giffin
>
> 757-375-1491
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate:http://www.team.net/donate.html
> Archive:http://autox.team.net/archive  http://www.team.net/pipermail/fot
> Unsubscribe/Manage:http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20211203/3c7ac5bd/attachment.htm>