[Fot] Fwd: Misab seals

[Bud Rolofson]

Weber soft mounts should be tightened to a specific spacing between the carbs and the intake manifold. I don't remember the spec offhand but the soft mount instructions tell you what the correct distance is.

Bud

Sent from my Commodore 64

> On Sep 15, 2020, at 4:29 PM, van.mulders.marcel--- via Fot <fot at autox.team.net> wrote:
> 
> Hi P.J. Mckearn
> Thanks for that. What about using rubber grease (the stuff that is used on rubber brake parts)?
> Marcel
> Van: "McKearn McKearn" <mckearn2 at gmail.com>
> Aan: "van mulders marcel" <van.mulders.marcel at telenet.be>
> Cc: "fot" <fot at autox.team.net>
> Verzonden: Dinsdag 15 september 2020 20:44:13
> Onderwerp: Re: [Fot] Fwd: Misab seals
> 
> I'd go with the too tight theory.
>  The seals on my Gt6 did the same thing after very few miles . Replaced them with new and only slightly tightened and so far so good..
>                                P.J.
> 
>> On Mon, Sep 14, 2020 at 4:49 AM van.mulders.marcel--- via Fot <fot at autox.team.net> wrote:
>> Thes misab Weber seals are almost new and deteriorating already. Poor quality? or does anyone know of another reason? Too tight? Does anyone know of better alternatives?
>> Marcel
>> 
>> Van: "trbelgium1" <trbelgium1 at gmail.com>
>> Aan: "van mulders marcel" <van.mulders.marcel at telenet.be>
>> Verzonden: Maandag 14 september 2020 11:21:40
>> Onderwerp: Misantroop seals
>> 
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/mckearn2@gmail.com
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/levilevi@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200915/f755aa97/attachment-0003.htm>