[Fot] Best head gasket revisited

Jim Gray toodamnfunky at comcast.net
Sun Oct 25 08:58:58 MDT 2020


I use Mordy’s solid copper gaskets, no o-ring, just copper coat.

My current gasket is on it’s second engine.

jim g

 

From: Fot <fot-bounces at autox.team.net> On Behalf Of Joe Boruch via Fot
Sent: Saturday, October 24, 2020 7:25 PM
To: FOT List <fot at autox.team.net>
Subject: [Fot] Best head gasket revisited

 

I was not receiving list emails for a while, so I missed the conversation a few months ago. 

 

For those of you using the composite or even Cometic gaskets, have you done much relieving around the intake valves?  I have not found any such gasket that would not protrude out into the combustion chamber.  I even bought one from BPNW that was good for up to 92mm bore, but it still protruded.  I have been using steel shim head gaskets with copper wire o-rings in the fire rings, but would like a simpler set up.  I have held off on putting my TR3 engine back together for years (while playing with S2000s and Miatas) waiting for a better head gasket.  Joe B

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20201025/f1e2963c/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSCN1527.JPG
Type: image/jpeg
Size: 968371 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20201025/f1e2963c/attachment-0006.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSCN1571.JPG
Type: image/jpeg
Size: 985689 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20201025/f1e2963c/attachment-0007.jpe>


More information about the Fot mailing list